User manual EPSON POWERLITE 8300NL PRODUCT SUPPORT BULLETIN

[. . . ] What type of DVI port is on the PowerLite 8300 and PowerLite 9300 Projectors?The Projector has native resolution of 1280 x 1024. Its maximum "DVI" resolution is 1280 x 1024. This Projector can only support 1400 x 1050 DVI full-screen display using a DVI-D to VGA 15HD cable. [. . . ] [Keep Blocking] --- Enables you to register a started application in the "Exceptions" program of the Windows Firewall. The network port that the application uses is blocked. By selecting this button once, this security alert message will not be shown when starting the application next time. [Unblock] ------------- Enables you to register a started application in the "Exceptions" program of the Windows Firewall and unblock the network port that the application uses. By selecting this option once, this security alert message will not be shown when starting the application next time. [Ask me later]-------- When you want to select both buttons above or select either one later, this button is selected. The started application is not registered in the "Exceptions" program of the Windows Firewall and the network that the application uses is not unblocked. However, when restarting the application, the same security alert message is shown. · PC applications will work normally on Windows XP with SP2 if the "Unblock Item" is selected when the security alert screen is shown. For the detail operation information of each application, please refer to the following: Page 4 of 14 PSB. 2004. 10. 002 Operating Status Report When selecting the Keep Blocking button, the security alert message is closed and the main screen of each application is displayed. [EMP NS Connection Application] Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not detected. The other applications operate normally. However, there is a case that execution of automatic search disables automatic detection. This occurs when projectors are registered for automatic detection in EMP Monitor before installing SP2, then the registered projectors may not be detected again after SP2 installation. Therefore it is recommended to select Unblock in the security alert screen. If "Keep Blocking" has been selected when starting the application for the first time, and the blocking needs to be removed, complete the execution of the application and proceed with unblocking as follows: a. ) Start the Windows Security Center. Double click the icon in the shape of a shield that is always displayed on the taskbar after the installation of SP2. Windows Security Center screen b. ) Select and start Windows Firewall Page 5 of 14 PSB. 2004. 10. 002 [Caution] In case the check box for Don't allow exceptions is checked (this box is not checked at the initial setting), a network port for software is not unblocked even though the software is checked on Exceptions. Make sure this option is not selected. Windows Firewall screen Page 6 of 14 PSB. 2004. 10. 002 c. ) Select the Exceptions tab and display exceptions program. [Caution] If this check box is not checked, the security alert screen is not displayed when starting software. ·Exceptions screen d. ) Check the check boxes for the software you don't want to block. Page 7 of 14 PSB. 2004. 10. 002 [EMP NS Connection] · Check EasyMP Software box Unblock screen (EMP NS Connection) Page 8 of 14 PSB. 2004. 10. 002 [EMP Network Manager Application]· Check EPSON Projector box Unblock screen (EMP Network Manager) Page 9 of 14 PSB. 2004. 10. 002 [EMP Monitor Application] Check EasyMP. net Software box Unblock screen (EMP Monitor) Page 10 of 14 PSB. 2004. 10. 002 [EMP Multi Screen Adjustment Application] Check EPSON Projector Software for Multi Screen box Unblock screen (EMP Multi Screen Adjustment) Page 11 of 14 PSB. 2004. 10. 002 [Cinema Color Editor Application] ---> Check Cinema Color Editor. Unblock screen (Cinema Color Editor) By following the above procedure, the network port that each application uses is unblocked and they can operate normally. Page 12 of 14 PSB. 2004. 10. 002 Corresponding program name to PC applications PC Application Program name EMP NS Connection EasyMP Software EMP Network Manager EPSON Projector EMP Monitor EasyMP. net Software EMP Multi Screen Adjustment EPSON Projector Software for Multi Screen Cinema Color Editor Cinema Color Editor When selecting the Unblock button: The Security Alert screen is closed and the main screen is displayed. When selecting the Ask Me Later button: Port 3620 which is used by EMP NS Connection and is necessary for discovering projectors is blocked, and projectors are not detected. The other applications operate normally. However, there is a case where execution of automatic search disables automatic detection. This occurs when projectors are registered for automatic detection in EMP Monitor before installing SP2, the registered projectors may not be detected after SP2 installation. Page 13 of 14 PSB. 2004. 10. 002 VCOM Driver The following message is shown after the VCOM driver is installed on your PC. [. . . ] 9514115MBP BUFFALO WLI-CB-G54 ADTEK ADLINK2422C FMV Notebook (Intel Calexico) Wired LAN cards configuration: Insert the wired LAN card to be tested into the projector and make a network connection to the PC. Items evaluated: The following items were tested and confirmed to work. DHCP can be setup using a browser and functions properly. EMP NS Connection functions properly with the freeze, mute, zoom, and video input change features. Power Point slide show works. Evaluation results for the Wired LAN cards: Page 2 of 3 PSB. 2003. 11. 001 Wired Card name 3Com 3C589C-TP 3Com 3CXE589ET-JP D-Link DFE670TXD Fujitsu FMV-J182 Hawking PN652TX Linksys PCM100 ver2 Netgear FA411 SMC SMC8041TX 3Com 10/100 LAN PC Card 3CCFE574BT PCET100-CL Linksys 10/100 PC Card SMC 8041TX V. 2, EZ PC Card 10/100, SMC I-O Data PCLA/TE PCC-TXD Kingston EtheRx PC Card KNE-PC2T PowerLite 735c pass pass pass pass pass pass pass pass pass pass pass pass Didn't pass Didn't pass Didn't pass PowerLite 7850p pass pass pass pass pass pass pass pass pass Didn't pass The following cards are NOT compatible: 1. [. . . ]