User manual EPSON SCAN SERVER TWAIN PRO NETWORK USERS GUIDE 2001

[. . . ] EPSON Scan Server & EPSON TWAIN Pro Network SCANNER UTILITY PROGRAMS ® All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. [. . . ] You can also start scanning by pushing the a Start button on the EPSON scanner or by clicking the Start button on the EPSON Scan Server dialog box. 2 Using the EPSON TWAIN Pro Network dialog box on the client PC 1. Place the document on the document table, or a stack of documents in the Automatic Document Feeder. Start EPSON TWAIN Pro Network from the TWAIN-compliant application and choose the appropriate settings for your document in the EPSON TWAIN Pro Network dialog box on the client PC. If you use the optional Automatic Document Feeder, remember to select the appropriate setting in the Document Source. If necessary, click Preview and check the scanned image in the Preview window. Network Scanning Basics 2-5 3. Click Scan in the EPSON TWAIN Pro Network dialog box. Scanning starts and the Progress bar indicates how much of the document has been scanned. Note: To cancel scanning, click Cancel on the Progress bar. When you are using the Automatic Document Feeder, do not open it until scanning is completed. After the scanning is finished, the scanned image is displayed in the application. Remember to remove the document(s) from the scanner. 2-6 Network Scanning Basics Using the Start button on the scanner 1. Start EPSON TWAIN Pro Network from the TWAIN-compliant application and choose the appropriate settings for your document in the EPSON TWAIN Pro Network dialog box on the client PC. If you use the optional Automatic Document Feeder, remember to select an appropriate setting in the Document Source. Place the document on the document table, or a stack of documents in the Automatic Document Feeder. Press the a Start button on the scanner. Press the Start button 2 Scanning starts and the Progress bar indicates how much of the document has been scanned. Note: To cancel scanning, click Cancel in the EPSON Scan Server dialog box on the scanner server PC, or Cancel on the Progress bar from the client PC. Clicking Stop in the EPSON Scan Server dialog box breaks the connection between the scanner server PC and the client PC, and exits EPSON TWAIN Pro Network on the client PC. To start scanning again, you will have to restart EPSON TWAIN Pro Network on the client PC. When you are using the Automatic Document Feeder, do not open it until scanning is completed. Network Scanning Basics 2-7 4. After the scanning is finished, remember to remove the document(s) from the scanner. When you return to the client PC, the scanned images will already be opened in the target application. Note: When you are using EPSON Scanner Monitor (in Windows 95 and NT 4. 0) or Scanner Events (in Windows Millennium Edition, 98, and 2000), starting EPSON Scan Server disables those functions, so pressing the a Start button does not activate those functions. After finishing EPSON Scan Server, you can then start EPSON Scanner Monitor. Using the Start button in the EPSON Scan Server dialog box 1. [. . . ] Click OK. Connecting the Scanner to the Scanner Server PC Connect the EPSON scanner to your scanner server PC. Refer to the Setup Guide of your scanner for details. A-18 Scanner Server PC Setup Glossary bit Short for binary digit. The smallest unit of data in computer processing. A bit can represent two values: on and off, or 1 and 0. bit/pixel The unit that indicates the number of bits allocated for a pixel. [. . . ]