User manual EPSON SCANSERVER TWAIN PRO NETWORK

[. . . ] User's Guide 4012394 XXX-00 EPSON Scan Server & EPSON TWAIN Pro Network SCANNER UTILITY PROGRAMS ® All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. [. . . ] 2-6 Using the EPSON TWAIN Pro Network dialog box on the client computer. 2-6 Using the Start button on the scanner . 2-8 Using the Start button in the EPSON Scan Server dialog box . 2-9 Getting Information From Online Help . 2-11 2 Network Scanning Basics 2-1 Network Scanning Procedure You need to perform the following procedures to use your EPSON scanner on a network and to send scanned images to a client computer. Start the EPSON Scan Server software and specify which EPSON scanner is to be used from the scanner server PC. Specify the scanner server PC to be used by using the EPSON TWAIN Pro Network setup dialog box in the Control Panel on the client computer. Start the TWAIN-compliant application and open EPSON TWAIN Pro Network from the application on the client computer. This chapter describes the above procedures in detail. Starting EPSON Scan Server 1. Turn on the scanner to be used for network scanning. The Enter Network Password dialog box appears. 2-2 Network Scanning Basics 3. Enter your password for the network in the Password box and click OK. Windows will automatically launch EPSON Scan Server and display the EPSON Scan Server dialog box or its icon on the Windows taskbar (if you have included the software in the Start up folder of Windows). To manually start EPSON Scan Server from Windows 2000, 98, 95, or NT 4. 0, click Start and point to EPSON Scan Server, then select EPSON Scan Server. 2 Note: Make sure no other interface is used. To exit EPSON Scan Server, click Exit on the EPSON Scan Server dialog box. Make sure that no client is using the scanner before attempting to quit. Network Scanning Basics 2-3 Starting EPSON TWAIN Pro Network Note: Windows 2000 or NT 4. 0 users who use the NTFS file system and do not have Administrator privileges need to have permission to modify the following folder and subfolder: C:\WINNT\TWAIN_32\EPFBPRON 1. From the client Computer, start the TWAIN-compliant application you want to use, such as Microsoft Imaging for Windows or Adobe Photoshop. Refer to the User's manual of the application to check if the application supports TWAIN. From the TWAIN-compliant application's menu, select EPSON TWAIN Pro (32bit) Network as the TWAIN data source and open EPSON TWAIN Pro Network using a command such as Acquire. The exact procedure depends on the application. Refer to the User's Guide or documentation included with the application. 2-4 Network Scanning Basics The EPSON TWAIN Pro Network dialog box appears. 2 3. Select the appropriate scanning settings (Image Type or Resolution, etc. ) for your purpose from this dialog box and click OK. [. . . ] To manually assign an IP address, select Specify IP address then enter the IP Address and Subnet Mask. Click OK. A Scanner Server PC Setup A-15 Assigning an IP address to a scanner server PC on Windows NT 4. 0 1. Click Start and point to Settings, then select Control Panel and double-click the Network icon in the Control Panel window. The Network dialog box appears with the Identification tab on the top. [. . . ]