User manual EPSON STYLUS 1520 CONNECTION GUIDE

[. . . ] Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. iii WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. [. . . ] You must use the printer driver software that came on the USB Printer Software CD-ROM. Before you begin this procedure, you must install the iMac Update 1. 0 from Apple at http://swupdates. info. apple. com. Contact Apple Computer if you have any problems installing this update. Follow these steps to install the USB printer driver software: 1 Turn on your iMac and wait until you see your desktop icons. (Always turn on your computer first. ) Then turn on the USB hub (if you're using one) and your EPSON printer. You see a message that the computer can't find the software it needs for your device. Insert the EPSON USB Printer Software CD-ROM. Double-click the Installer icon for your printer, then click Continue. Click Install and follow the on-screen instructions to install the printer driver and utilities, and select a default paper size. After installation is complete, click Restart to restart your iMac. Open the Chooser from the Apple menu. 2 3 4 5 6 7 13 8 Click the printer icon for your printer. Printer icons are labeled as follows: SC 440 (EPSON Stylus COLOR 440) SC 600 (EPSON Stylus COLOR 600) SC 640 (EPSON Stylus COLOR 640) SPEX (EPSON Stylus Photo EX) SP 700 (EPSON Stylus Photo 700) SC 800 (EPSON Stylus COLOR 800) SC 850 (EPSON Stylus COLOR 850) SC 1520 (EPSON Stylus COLOR 1520) SC 3000 (EPSON Stylus COLOR 3000) 9 Click the USB Port icon (if you've connected more than one printer of the same model, the port is numbered). 10 Turn on background printing if you want, then close the Chooser. If you don't see your printer icon in the Chooser, make sure your USB port and parallel port connections are secure and your printer is turned on. Check the MacOS Info Center on your iMac desktop for additional information on USB connections. If your EPSON printer came with other application software, see your printer documentation for instructions on installing it from the printer's CD-ROM. 14 Getting Started on a Windows 98 System The instructions on the next few pages explain how to connect the USB/ Parallel Adapter cable to your Windows 98 system and how to install the printer software. If you're connecting to an EPSON Stylus COLOR 600 or EPSON Stylus COLOR 800 printer, you'll also find instructions on how to set up your system to use Windows Print Manager. For instructions on using the printer software, see the documentation that came with your printer. IMPORTANT: You can't use the adapter with the printer driver software that came with your printer. You must use the printer software that came on the USB Printer Software CD-ROM. However, you can use the USB printer software to connect the printer to your computer via the parallel port, if you want. 15 Connecting the Cable You can connect the USB/Parallel Adapter directly to a USB port on your computer, or you can connect it to a USB hub connected to a port on your computer. If you have any printing problems when the printer is connected via a USB hub, try connecting your printer directly to the USB port on the computer instead. 1 2 Locate an available USB port on your computer (your USB ports may be in a different location than shown in the illustration on page 17). [. . . ] In the EPSON Spool Manager window, select the icon for your printer. The Queue Setup dialog box appears. 29 4 Select Use Print Manager, then click OK to close the Queue Setup dialog box. 5 Close the Spool Manager window. 30 Appendix A: Using Monitor3 The Monitor3 utility lets you continue to work on your iMac while your document is printing (though printing and processing may be slower). The Monitor3 dialog box lets you check on your print jobs and cancel, pause, or restart them. See the next section to turn on background printing and increase the memory allocation for Monitor3. Setting Up Monitor3 1 2 3 Open the Chooser from the Apple menu and select the icon for your printer. [. . . ]