User manual EPSON STYLUS C82

[. . . ] EPSON Stylus ® C82 Printer Basics Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. [. . . ] Visit http://support. epson. com and check the section for your product to see if there is a new driver available, free of charge, for downloading to your computer. Download instructions are posted for your convenience. Problem Solving 39 Printer Parts Paper support Right edge guide Left edge guide Printer cover Output tray Output tray extensions Ink cartridge holder (not removable) Paper thickness lever Paper / Cancel Print Job button and paper out light Ink button and ink out light Power button and light 40 Problem Solving Diagnosing Printer Problems You can diagnose some problems by checking the printer's control panel lights, as described in this section, or running a printer check, as described on page 42. Checking the Control Panel Lights Follow the guidelines below when you check the control panel lights: P is on or flashing The Ppower light is on when the printer is ready to print. It flashes when the printer is receiving a print job, charging ink, or cleaning the print head. It also flashes when the print head moves to the ink cartridge replacement position. ) is on ) is flashing The printer is out of paper. Load paper as described on page 7, and then press the ) paper button to resume printing. Press the ) paper button to eject the jammed paper. If that doesn't clear the error, open the printer cover and remove any paper inside, including torn pieces. Then load a new stack of paper and press the ) paper button to resume printing. One of the ink cartridges is low on ink. Follow the instructions beginning on page 29 to replace the empty cartridge. If the H ink out light goes on after you've replaced a cartridge, you may have installed a cartridge your printer can't use. Check the number on the ink cartridge package to make sure you've installed the correct cartridge. One of the ink cartridges is out of ink. Follow the instructions beginning on page 29 to replace the empty cartridge. If the H ink out light remains on after you've replaced a cartridge, you may have installed a cartridge your printer can't use. Check the number on the cartridge package to make sure you've installed the correct cartridge. Jammed paper may be blocking movement of the print head, or you may have an internal error. Turn off the printer, open the cover, and check for any jammed paper. Also, make sure you removed all the packing material, as described on the Start Here sheet. If the error isn't cleared, contact your dealer or EPSON. Turn the printer off and contact your dealer or EPSON as described on page 51. H is flashing H is on H is on and ) is flashing ) and H are flashing Problem Solving 41 P is off The printer is not receiving power. Try these solutions: Make sure the printer is turned on. [. . . ] This warranty does not cover any color change or fading of prints or reimbursement of materials or services required for reprinting. This warranty does not cover damage to the EPSON product caused by parts or supplies not manufactured, distributed or certified by Epson. This warranty does not cover ribbons, ink cartridges or third party parts, components, or peripheral devices added to the EPSON product after its shipment from Epson, e. g. , dealer or user-added boards or components. Epson is not responsible for warranty service should the Epson label or logo or the rating label or serial number be removed or should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-Epson products, or service other than by an Epson Authorized Servicer. [. . . ]