User manual EPSON STYLUS DX7400 START HERE

[. . . ] Note: In the Reduced Margin Copy mode, you can make a copy with a 3-mm bottom margin on paper. 3. Plugging in the Power Cord Error Recall Reset Reset all(3sec) Scan Recall 5 5 5 You can create the mirror image of an original image on Iron-On Cool Peel Transfer Paper (image flipped from right to left). Use the Copies/Value buttons to select Mirror from the Copy Mode menu. Ink charging starts. While charging, this product produces a variety of mechanical sounds. [. . . ] When the P On light stops flashing, ink charging is complete. 4. Press the P On button to turn on this product. On Scan Save(3sec) c Stop Return to Top Caution: Do not turn the power off during the ink charging process. Do not load paper until ink charging is complete. BorderFree Copy You can copy to the full page (including the margin area) of paper. Use the Copies/Value buttons to select Borderfree from the Copy Mode menu. Note: Because this feature enlarges the image to a size slightly larger than the paper size, the portion of the image that extends beyond the edges of the paper will not be printed. Repeat Copy You can create multiple copies of an image on a sheet of paper. Use the Copies/Value buttons to select Repeat from the Copy Mode menu. Error Recall Reset Reset all(3sec) Co Copies Value B&W Menu py Color Enter Press the P On button. 2. Open the ink cartridge packages. Do not remove the blue portion of the tape seal from the top of the cartridges. Note: The ink cartridges packaged with this product are partly used during the initial setup to fully charge the print head. This one-time process consumes a considerable amount of ink but subsequent cartridge sets will last for their full rated life. 2-up Copy You can put two pages of the original images on a sheet of paper. Use the Copies/Value buttons to select 2-up from the Copy Mode menu. 5. The Reference Guide includes detailed information about printing and scanning. To view the Reference Guide, see "Viewing the Reference Guide". EPSON Installation Program dialog box For users of Mac OS 8. 6 to 9. x Press to turn off. Menu Installing the Software for Mac OS X 1. Make sure that this product is off and insert the software CD into the CD-ROM drive. Double-click the Mac OS X Driver folder. Double-click your preferred language folder. Double-click the EPSON TWAIN 5 Installer icon. Follow the on-screen instructions to install EPSON TWAIN. If the Authorization window opens, click the key icon, enter the administrator's name and password, click OK, and then click Continue. After installing EPSON TWAIN, double-click the EPSON Scan to File folder in your preferred language folder, and then double-click the EPSON Scan to File Installer icon to install EPSON Scan to File. [. . . ] If the Authorization window opens, click the key icon, enter the administrator's name and password, click OK, and then click Continue. After installing EPSON TWAIN, double-click the EPSON Scan to File folder in your preferred language folder, and then double-click the EPSON Scan to File Installer icon to install EPSON Scan to File. After installing EPSON Scan to File, double-click the Printer Driver folder in the Mac OS X Driver folder, and then double-click CX3200. pkg in your preferred language folder to install the printer software. After installing the software, follow the instruction below to select this product: Double-click Macintosh HD. [. . . ]