User manual EPSON STYLUS PHOTO 925

[. . . ] User's Guide 4022440-00 EUL User's Guide Where to Find Information . 4 Printer Parts and Control Panel Functions . 138 English Where to Find Information Setup This guide will help you set up and begin using your printer. It includes information on setting up your printer and installing the printer software. [. . . ] The other setting prints with no margins on either side of your printout. 66 Standard margins No margins Note: The top margin is automatically set to 20 mm, regardless of the margin setting. Removing Roll Paper Follow the directions below to remove the paper from the printer. After printing is completed, the last photo printed remains in the printer without being cut. Press the roll paper button to cut the photo remaining in the printer. Note: Depending on the size of the photos, two photos may remain in the printer without being cut. Press the roll paper button in this case as well; both photos are cut. See "Using Automatic Roll Paper Cutter" in the online Reference Guide for the detailed explanation on how to do this. 67 English To print data with no margins between separate files, as shown below, do not press the z roll paper button between print jobs. 2. Hold down the z roll paper button for about 3 seconds. The paper feeds in reverse to a position where it can be easily removed from the sheet feeder at the back of the printer. If it does not feed to this position, repeat this step. A message indicating that the roll paper is removed appears on the display. 3. Turn the roll paper knob and roll up the roll paper. 68 Storing EPSON Roll Paper Return unused paper to the original package as soon as you finish printing. EPSON recommends storing your printouts in a resealable plastic bag. Keep them away from high temperature, humidity, and direct sunlight. Using Automatic Roll Paper Cutter Note: Refer to "Roll Paper Cut" on page 43 for printing on roll paper using the cutter. Cutting position adjustment with Automatic Roll Paper Cutter Make sure to adjust the cutting position to improve its precision. Follow the procedure described in the next section in order to adjust the cutting position of the cutter. 69 English 4. Gently remove the paper, then press the z roll paper button to clear maintenance light. Note: Before adjusting the cutter position, it is necessary to turn the printer on and set the roll paper. See for more details about roll paper setting. To maintain a precise cutting position, we recommended to adjust the cutting position each time you change the type or size (width) of roll paper. Using the control panel 1. Press the ( maintenance button to display the Advanced Settings menu. Press the d button to position the cursor at the Cutting Position Adjustment and press the Select button. Check that the roll paper is set and press the Custom 1 button. The cutting position adjustment pattern is printed out, and the roll paper is automatically cut. Look at the cutting position adjustment pattern and find the number for which the color boundary is cut with the highest precision. [. . . ] The minimum right margin is as follows: 3. 0 mm (0. 12") for single sheets. The minimum bottom margin is 14. 0 mm (0. 55"). When printing with the No Margins feature, print quality may decline in the top and bottom areas of the printout, or the area may be smeared. Note: Always load paper into the sheet feeder short edge first. Load envelopes flap edge first with the flap side down. 142 Black ink cartridge (T026) Color Print capacity* Cartridge life Black 540 pages (A4, text at 360 dpi) 2 years from production date (within 6 months after opening package, at 25°C [77°F]) Storage: -20 to 40°C (-4 to 104°F) 1 month at 40°C (104°F) Transit: -30 to 60°C (-22 to 140°F) 1 month at 40°C (104°F) 120 hours at 60°C (140°F) Freezing:** -16°C (3. 2°F) Dimensions 20. 1 mm (W) × 66. 85 mm (D) × 38. 5 mm (H) Temperature 143 English Ink Cartridges Color ink cartridge (T027) Color Print capacity* Cartridge life Cyan, Magenta, Yellow, Light cyan and Light magenta 220 pages (A4, 360 dpi, 5% duty each color) 2 years from production date (within 6 months of opening the package at 25°C [77°F]) Storage: -20 to 40°C (-4 to 104°F) 1 month at 40°C (104°F) Transit: -30 to 60°C (-22 to 140°F) 1 month at 40°C (104°F) 120 hours at 60°C (140°F) Freezing:** -18°C (-0. 4°F) Temperature Dimensions 49. 1 mm (W) × 66. 85 mm (D) × 38. 5 mm (H) * The figure given is based upon continuous printing after ink replacement. [. . . ]