User manual EPSON STYLUS PHOTO R390

[. . . ] Online Guides included on the CD-ROM The guides on the CD-ROM included with your printer will help you learn more about your printer. To view these guides, you must have a Web browser installed on your computer. For more information on using this CD-ROM, see the included CD-ROM Booklet. Reference Guide Provides detailed information about printer software settings, printing on special paper, maintenance, and problem solving. All rights reserved. [. . . ] You can select from the following PhotoEnhance settings. Standard This setting provides standard image correction for most photos. This setting is best for photos of people. This setting is best for outdoor scenery such as mountains, sky, and oceans. This setting makes your photos look as if they were taken with a soft-focus lens. This setting applies a sepia tone to your photos. People Nature Soft Focus Sepia 30 If you are printing photos taken with a digital camera, you can also select the Digital Camera Correction check box to give your printed images the smooth, natural appearance of photographs taken with a film camera. Using the Custom mode The Custom mode offers ready-made settings designed for printing text and graphs and for applying a color-matching method. You can also create and save your own custom settings. You can select from the following ready-made settings. Text/Graph This setting is good for printing presentation documents such as graphs and charts. This setting is best for printing drafts of text. This setting automatically adjusts printout colors to match colors on your screen. Draft ColorSync When you choose a Custom setting, other settings such as Print Quality, and Color are made automatically. Changes to these settings are reflected in the display on the left side of the Print dialog box. Follow the steps below to select a Custom setting. 31 1. Verify that the Media Type and Ink settings in the Print dialog box are correct. Click the repeatedly until the Print button changes into the Save File button. Select the location where you want to save the file, then type a file name in the Save As box and click Save. When you want to print the data, double-click the file to open EPSON Monitor 3. Click the Resume button to send the data to the printer. 34 Replacing Ink Cartridges This printer uses ink cartridges equipped with IC chips. The IC chip accurately monitors the amount of ink used by each cartridge, so even if a cartridge is removed and later reinserted, all of its ink can be used. However, a small amount of black and color ink is consumed each time the cartridge is inserted because the printer automatically checks reliability. Follow the instructions in this section to replace an ink cartridge using the printer's control panel or the status Monitor utility. The printer's indicator lights will inform you when it is time to obtain a replacement ink cartridge and when it is time to replace an empty cartridge. You can also check ink levels and start the ink cartridge replacement procedure from your computer using the Status Monitor 3 utility. See the online Reference Guide for more information. This table describes the status of the lights on your printer and the actions you need to take. Lights Action Obtain a replacement black ink cartridge (T015). [. . . ] If you have a modem, phone (02) 9417 5090. 63 Internet URL http://www. epson. com. au Access the EPSON Australia World Wide Web pages. Worth taking your modem here for the occasional surf!You can get the same information as offered on the EPSON FAXBACK and the EPSON Bulletin Board plus more. Your dealer Don't forget that your dealer can often help identify and resolve problems. The dealer should always be the first call for advice on problems. [. . . ]