User manual EPSON STYLUS PHOTO RX500

[. . . ] Epson Stylus Photo RX500 ® User's Guide Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other equipment. [. . . ] Professional Mode: For Document Type, choose Film. For Film Type, select Positive Film if you're scanning slides, or Color Negative Film or B&W Negative Film if you're scanning film. Click Preview to preview your scan. Tip: You must preview your scan to make some settings, like Dust Removal, active. 12. Click the Dust Removal box to reduce the appearance of dust on the film. Click Scan. Note: Never open the scanner lid while scanning, or your scans may not look right. 78 Scanning to a Computer If you scanned from an application like Photoshop, your scanned images open in your application window. Note: Some applications don't support scanning multiple images at once and will only open one scanned image. 14. Click Close to exit EPSON Scan. Scanning Using the RX500 Buttons You can use the buttons on the RX500 to scan an image to your computer or to send an e-mail with a scanned image attached. Note: Both Epson Scan and Epson Smart Panel must be installed on your computer to scan to your computer or to attach to an e-mail. Scanning to Your Computer 1. Make sure the RX500 is connected to your computer. Place your photo face down on the glass in the upper left corner. Move it about 0. 1 inch from the top and side edge so the entire photo is scanned. Orient the photo as shown Move the photo in about 0. 1 inch from the edges Note: If you place your photo too close to the edges of the scanner glass, its edges may not be scanned. Scanning Using the RX500 Buttons 79 4. Press the Scan button on the RX500 to switch to scan mode. You see this LCD screen: Press this button until you see To PC 1. To Photo Card OK 6. Press the top left button to select To PC. For Windows XP, if you see the screen below on your computer, select EPSON Scan and click the Always use this program for this action box. Then click OK. Select this option Then select this box 8. When you see the File Save Settings window, type a name for your file in the Prefix box, select a file format in the Type box, and click OK. Epson Scan starts and scans your image to the location you specified. 80 Scanning to a Computer Scanning to E-Mail This section explains how to use the buttons on the RX500 to scan an image, transfer it to your e-mail program, and attach it to an e-mail. Note: You can also scan to e-mail by double-clicking the EPSON Smart Panel icon on your desktop and clicking the Scan to E-mail icon. Make sure the RX500 is connected to your computer. Place your photo face down on the glass in the upper left corner. Move it about 0. 1 inch from the top and side edge so the entire photo is scanned. Orient the photo as shown Move the photo in about 0. 1 inch from the edges Note: If you place your photo too close to the edges of the scanner glass, the edges may not be scanned. 4. Press the Scan button on the RX500 to switch to scan mode. You see this LCD screen: Press this button until you see To E-Mail 1. To Photo Card OK 6. Press the top left button to select To E-mail. [. . . ] When warranty service involves the exchange of the product or a part, the item replaced becomes Epson property. The replacement product or part may be new or refurbished to the Epson standard of quality, and, at Epson's option, may be another model of like kind and quality. Epson's liability for replacement of the covered product will not exceed the original retail selling price of the covered product. Exchange products and parts assume the remaining warranty period of your original product covered by this limited warranty. [. . . ]