User manual EPSON STYLUS PHOTO STYLUS PHOTO

[. . . ] User's Guide Printed on recycled paper with at least 10% post-consumer content paper support extension paper support edge guides printer cover control panel output tray output tray extensions ink cartridge clamp thickness lever load/eject button paper light power button black ink out light color ink out light cleaning button All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. [. . . ] These files can then be printed from another computer attached to the printer. First you need to install the EPSON Stylus Photo printer software on each computer that is going to print on the network. Then run Spool Manager and identify the shared directory to use for journal files. After you set this up on the system connected to the printer (the host system), you need to perform a similar procedure on each remote system on the network. Under Windows 95, you also need to specify the port and network path to the printer. 4-9 Managing Print Jobs and Network Printing Setting Up the Host System Follow these steps to set up the computer connected to the printer: 1. Create an icon for the EPSON Spool Manager (EPSPMGR4. EXE) in the \WINDOWS\SYSTEM folder. Open the Spool Manager window as described on page 4-2. In the Spool Manager window, double-click the queue you want to use for network printing. Click the Remote Despool tab and then click the Printing from remote queues option. Click the Browse button and select the remote server directory that will receive journal files. Click OK and minimize the Spool Manager. Setting Up Remote Systems Follow these steps to set up computers on the network: 1. Create an icon for the EPSON Spool Manager (EPSPMGR4. EXE) in the \WINDOWS\SYSTEM folder. Open the Spool Manager window as described on page 4-2. In the Spool Manager window, double-click the queue you want to use for network printing. Click the Spool to remote printer button. 4-10 Managing Print Jobs and Network Printing 5. Click the Browse button and select the directory you're using for journal files on the remote server. Click OK and minimize the Spool Manager. Setting Up Your Network Path in Windows 95 If you want to use your printer on a network running Windows 95, you need to set up the port and network path on the computer connected to the printer. Click Start, point to Settings, and then point to Printers. Right-click the EPSON Stylus Photo icon and choose Properties. Click the Details tab. You see the dialog box shown below: 3. Click the Add Port button, then specify the network path to the printer and click OK. 4-11 Managing Print Jobs and Network Printing 4. Open the Spool Manager window as described on page 4-2. [. . . ] This happens every time you turn on or reset the printer. A method of printing in which images, lines, letters, or symbols are formed by precisely spraying ink onto paper. The connection between the computer and a peripheral such as a printer. Some printers have two interfaces, parallel and serial. [. . . ]