User manual EPSON STYLUS PRO 11880

[. . . ] User's Guide NPD2979-00 User's Guide Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] The settings you make from step 4 are registered in the number you have selected here. Note: We recommend you write down the registered number and the settings you make from step 4. You can change the registered number on your computer by using EPSON LFP Remote Panel. If it does not print evenly on the custom paper you have registered, use unidirectional printing. Clear the High Speed check box in the printer driver. C Variety of Printings 100 User's Guide D Select paper type, if necessary. Press the / button to select PAPER TYPE, and then press the button. Press the / button to select media type. Press the button to go back to the previous menu. Set the distance between the print head and the paper (Platen Gap), if necessary. Press the / button to select PLATEN GAP, and then press the button. Press the / button to select a suitable setting for the paper. Press the button to go back to the previous menu. Note: You can adjust the distance between the print head and paper. The print quality improves when you adjust the Platen Gap properly. If the Platen Gap is too narrow when you print on the thick paper, the print head touches the paper so that the print head and the paper may be damaged. F Print a paper thickness test pattern. Press the / button to select THICKNESS PATTERN, and then press the button. Press the button to print the paper thickness test printing pattern. Example of pattern: E G Examine the printed pattern to determine which set of lines are aligned (showing the smallest gap), and select the Thickness Number (from 1 to 15). Press the / button to select the number. In the case of the illustration above, select 4. Press the button to go back to the previous menu. H Set the cut method, if necessary. Press the / button to select CUT METHOD, and then press the button. Press the / button to select a suitable setting for the paper. Press the button to go back to the previous menu. Set Paper Feed Adjustment, if necessary. [. . . ] See the Epson Web site for the latest supported operating system. USB connection Windows The following conditions must be met: A computer that Windows Vista, XP, or 2000 is pre-installed, or Windows 2000, Me, or 98 is pre-installed and then upgraded to Windows Vista, XP, or 2000. A computer with a USB port that is guaranteed by the computer manufacturer. (Ask the computer manufacturer if necessary. ) Mac OS X Note: For Windows 2000, you must log in as a user with administrator rights (a user belonging to the Administrators group). For Windows XP/Vista, you must log in as a user with an Administrator account. [. . . ]