User manual EPSON STYLUS PRO 3800

[. . . ] EPSON Stylus Pro 3800 User's Guide User's Guide NPD2382-00 EPSON Stylus Pro 3800 User's Guide Copyrights and Trademarks All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. [. . . ] 9 nnnnnn PAGES STANDARD, PAPER NO. 1-10 MATTE THICK, MATTE THIN, PHOTO PLAIN, FINE ART PAPER, REMOTE PANEL PAPER NARROW, STANDARD, WIDE, WIDER PRINT 1 - 15 -0. 70% - 0. 70% -0. 70% - 0. 70% 0. 0 SEC- 10. 0 SEC EXECUTE EXECUTE YY/MM/DD HH:MM MM/DD/YY HH:MM -20 - 0 - +20 PREM. GLOSSY/LUSTER PQ INK JET PAPER ENHANCED MATTE PAPER 0. 1 - 0. 5 mm "MANUAL" on page 108 The Control Panel 101 EPSON Stylus Pro 3800 User's Guide "NETWORK SETUP" on page 108 "NETWORK SETUP" on page 108 "IP ADDRESS SETTING" on page 108 "IP, SM, DG SETTING" on page 108 DISABLE, ENABLE AUTO, PANEL, PING IP ADDRESS 000. 000. 000. 000 - 192. 168. 192. 168 255. 255. 255. 255 SUBNET MASK 000. 000. 000. 000 - 255. 255. 255. 000 255. 255. 255. 255 DEFAULT GATEWAY 000. 000. 000. 000 - 255. 255. 255. 255 "APPLE TALK" on page 109 "MS NETWORK" on page 109 "BONJOUR" on page 109 "INIT NETWORK SETTING" on page 109 ON, OFF ON, OFF ON, OFF EXECUTE Basic Menu setting procedure This section describes how to enter Menu mode and make settings with the buttons on the control panel. Note: Press the Cancel/Reset + button whenever you want to exit Menu mode and return to the READY status. Press the Back/Left l button to return to the previous step. 1. Enter Menu mode Make sure that READY appears on the LCD panel, and then press the Menu/Right r button. The first menu appears on the LCD panel. Select a menu Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a desired menu. Set the menu Press the Menu/Right r button to set the selected menu. The first item appears on the LCD panel. The Control Panel 102 EPSON Stylus Pro 3800 User's Guide 4. Select an item Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a desired item. Set the item Press the Menu/Right r button to enter the selected item. The first parameter appears on the LCD panel. Select a parameter Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a parameter for the item. Set the parameter Press the Enter button to store the selected parameter. If the parameter is for execution only, press the Enter button to execute the function for the item. After execution, the printer exits Menu mode and returns to the READY status. Exit Menu mode Press the Cancel/Reset + button. The printer returns to the READY status. Details of Menu mode PRINTER SETUP This menu contains the following items. PLATEN GAP You can adjust the distance between the print head and paper. If you find that printed images are smeared, select WIDE or WIDER. Select NARROW for printing on thin paper, or WIDEST for printing on thick paper. PAPER SIZE CHECK When you select ON, the printer stops printing if the width of paper loaded in the printer does not match the data width. When you select OFF, the printer continues to print even if the paper width does not match the data width, and the printer may print beyond the paper. Note: When you load the paper using the manual feed slot, select ON. When you perform borderless printing, select ON. The Control Panel 103 EPSON Stylus Pro 3800 User's Guide INITIALIZE SETTINGS You can return all setting values you have made in the PRINTER SETUP to their factory set value. TEST PRINT This menu contains the following items. NOZZLE CHECK You can print a print head nozzle check pattern for each ink cartridge. From the printing results, you can check whether the nozzles are delivering ink properly. [. . . ] If you use an extension cord with this product, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. Do not attempt to service this product yourself. Unplug this product and refer servicing to qualified service personnel under the following conditions: The power cord or plug is damaged; liquid has entered the product; the product has been dropped or the cabinet damaged; the product does not operate normally or exhibits a distinct change in performance. [. . . ]