User manual EPSON STYLUS SX415 BASIC OPERATION GUIDE

[. . . ] Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo, Memory Stick PRO-HG Duo, Memory Stick Micro, MagicGate Memory Stick, and MagicGate Memory Stick Duo are trademarks of Sony Corporation. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. Use only the power cord that comes with the printer. [. . . ] Check u aligns with the corner of the sheet. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing. *2 Select On to increase the print speed. Select Off to improve the print quality (but your photos print more slowly). On the screen in step C, you can select to replace ink cartridges even if they are not expended. You can also start this operation by entering F Setup mode, Maintenance, and then Change Ink Cartridge. If non-genuine ink cartridges are installed, the ink cartridge status may not be displayed. Print head cleaning uses ink from all cartridges, so clean the print head only if quality declines. If quality does not improve after cleaning four times, turn off the printer for at least six hours. Depending on the settings on this printer and the digital camera, some combinations of paper type, size, and layout may not be supported. Some of the settings on your digital camera may not be reflected in the output. Ink Levels Maintenance Nozzle Check Head Cleaning Head Alignment Change Ink Cartridge Language Display Format PictBridge Setup Restore Default Settings 1-up with Info, 1-up without Info, View Thumbnail Images Turn off the printer, open the scanner unit, remove paper. Make sure photos are positioned correctly. Turn off the printer, then press On button to turn on. The printer's ink pads are nearing the end of their service life. The printer's ink pads are at the end of their service life. Cannot recognize the memory card or disk. R & 52 R & 56 R & 56 R & 57 R & 20 Turn the printer off and then back on. Make sure that no paper is still in the printer. if the error message still appears , contact Epson support. if the error message still appears , contact Epson support. Contact Epson support to replace ink pads before the end of their service life. [. . . ] If a moiré (cross-hatch) pattern appears on your copy, change the Zoom setting or shift the position of your original. Make sure you selected the correct Paper Size, Layout, Expansion, and Zoom setting for the loaded paper. R & 26, 35 Make sure you loaded paper and placed the original correctly. R & 16, 20 If the edges of the copy or photo are cropped off, move the original slightly away from the corner. [. . . ]