User manual EPSON STYLUS COLOR

[. . . ] Access the Technical Support in the following ways: Error indicators You can identify many common problems using the lights on the printer's control panel. Use the following table of light patterns to diagnose the problem, and then apply the recommended solution. Lights O Problem and solution Paper out No paper is loaded in the printer. Load paper in the sheet feeder, and then press the b maintenance button. The printer resumes printing and the light goes out. [. . . ] Open the printer cover and remove any paper or other obstructions from the paper path by hand. If the error does not clear, contact your dealer. kP k Unknown printer error An unknown printer error has occurred. b Turn off the printer and contact your dealer. O = on, N = off, k k = flashing 4. Follow the on-screen instructions to install the printer software. Press the P power button to turn on the printer. The print head moves to the ink cartridge installation position. After installing the software, click Chooser in the Apple menu, and then select the icon for your printer and the port that your printer is connected to. Safety Instructions Read all of the instructions in this section when setting up and using your printer. The printer begins the ink charging process. While charging ink, the printer produces a variety of mechanical sounds. When the green lamp stops flashing, ink charging is complete. When choosing a place for the printer: For users of Mac OS X Note: 1. This software does not support the UNIX File System (UFS) for Mac OS X. Install the software on a disk or in a partition that does not use UFS. Do not block or cover the openings in the printer's cabinet. Do not attempt to service the printer yourself. Unplug the printer and refer servicing to qualified service personnel under the following conditions: The power cord or AC plug is damaged; liquid has entered the printer; the printer has been dropped or the cabinet damaged; the printer does not operate normally or performs differently. Do not insert objects through the slots in the printer's cabinet. Take care not to spill liquid on the printer. Removing the cartridges can dehydrate the printer head and may prevent the printer from printing. c Note: Caution: Do not turn the power off during the ink charging process. Do not load paper until ink charging is complete. When choosing a power source: In order to produce high quality printouts, the print head in your printer must be fully charged with ink during the initial setup. This process consumes ink from the ink cartridges packaged with your printer. Replacement cartridges will last for their full rated life. Note: When you print, be sure to match the Format for setting in the Page Setup dialog box and the Printer setting in the Print dialog box. Otherwise, the data may not be printed correctly. See the Reference Guide for more details. All rights reserved. [. . . ] If you use an extension cord with the printer, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. If you plan to use the printer in Germany, the building installation must be protected by a 10 or 16 amp circuit breaker to provide adequate short-circuit protection and over-current protection for this printer. Information for United Kingdom Users Use of options EPSON (UK) Limited shall not be liable against any damages or problems arising from the use of any options or consumable products other than those designated as Original EPSON Products or EPSON Approved Products by EPSON (UK) Limited. Safety information w Warning: When handling ink cartridges: Do not open the ink cartridge packages until just before you install them. Keep ink cartridges out of the reach of children. [. . . ]