User manual EPSON STYLUS OFFICE BX925FWD GETTING STARTED GUIDE

[. . . ] Use paper only under these conditions: Temperature: 59 to 77 °F (15 to 25 °C) Humidity: 40 to 60% RH Ink Cartridges Color Cartridge life Temperature Cyan, magenta, yellow, black 6 months at 77 °F (25 °C) after opening the package Storage: ­4 to 104 °F (­20 to 40 °C) 1 month at 104 °F (40 °C) Freezing*: 3. 2 °F (­16 °C) Printable Area Single sheets Normal Borderless* A B-L B-R * Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C). Caution: To ensure good results, use genuine Epson ink cartridges and do not refill them. Other products may cause damage to your printer not covered by Epson's warranty. Do not use an ink cartridge if the date on the package has expired. C * When printing with the borderless feature, print quality may decline in the expanded area. Before printing large jobs using the borderless setting, print a single sheet to confirm printout quality. Paper Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. [. . . ] Indicates whether or when the CX7000F Series prints a report for outgoing faxes. Select Off to turn off report printing, On Error to print reports only when an error occurs, or On Send to print reports for every fax you send. Indicates the type of phone system to which you've connected the CX7000F Series. 5. Press the u or d button, or press the 3, 4, or 5 key on the numeric keypad, to display one of these options: 3. Paper Size 4. Automatic Reduction 5. Last Transmission Report Then press the x Start Color/OK button. Press the u or d button until the setting option you want is displayed, then press the x Start Color/OK button to select it. Repeat steps 5 and 6 to change any other settings. When you're finished, press the y Cancel/Back button to return to the 4. Scan & Print Setup menu. Dial Mode Tone (default) Pulse 10/06 11 Epson Stylus CX7000F Series 8. If you need to change the Dial Mode, DRD, ECM, V. 34, or Rings to Answer settings, press the u or d button, or press the 5 key on the numeric keypad, to display this option: 9. You see this display: If you want to redial the last fax number you used, press the Redial/Pause button instead of entering a fax number. The last fax number appears on the screen. 5. Communication 1. Dial Mode: Ton 3. To send a black and white fax, press the x Start B&W button. Press the keys on the numeric 1234567890 keypad to enter the fax number. You can enter the numbers 0 to 9 and the characters * and #, up to 64 digits total. Note: If you need to change a character to the left, press the l button to delete the character and re-enter it. Press the r button if you need to move the cursor to the right. 12 10/06 Epson Stylus CX7000F Series Selecting the Answer Mode The CX7000F Series tells you whether Auto Answer is turned on or not on the first screen: Scanning Directly From Epson Scan Y You can scan from any TWAIN-compliant application--such as ArcSoft PhotoImpressionTM--using Epson Scan. Or you can start Epson Scan directly from your computer and save your image to a file. Open the document cover and place your original facedown on the glass, in the upper left corner. Note: If you need to scan a thick document, you can remove the document cover (see page 6). 12:00 PM Y: Auto Answer is turned on 12:00 PM N To change the answer mode, N: Auto Answer is turned off press the Auto Answer button. The Y (for Yes) or N (for No) changes on the screen. Press Auto Answer again to change it back. You can select the number of rings that must occur before the CX7000F Series receives a fax using the Rings to Answer setting (see page 11 for details). 2. Close the cover gently so you don't move the original. Do one of the following to start Epson Scan: Windows®: Double-click the EPSON Scan icon on your desktop. Macintosh®: Double-click EPSON Scan in the Applications folder. If you are scanning from an application, start your application. [. . . ] Otherwise, set the lever to the m L position. The paper thickness lever is set to the m L position. If you are printing on paper sheets, press x Start Color/OK or x Start B&W to continue. If you're printing on envelopes, set the lever to the ^ H position. [. . . ]