User manual EPSON STYLUS PRO 7880C

[. . . ] User's Guide NDP2996-00 Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] To select a suitable language, follow the steps below. While in Maintenance mode, press the Paper Feed d button or Paper Feed u button to display LANGUAGE, and then press the Menu r button. Press the Paper Feed d button or Paper Feed u button to select a suitable language. Press the Enter button to set the language. Make sure that READY (or similar word in the language selected) appears on the LCD panel. Note: It takes a while until READY (or similar word in the language selected) appears. REMAINING PPR SETUP You can select a paper remaining counter function. When this function is on, ROLL PAPER COUNTER appears on the PRINTER SETUP menu. While in Maintenance mode, press the Paper Feed d button or Paper Feed u button to display REMAINING PPR SETUP, and then press the Menu r button. The Control Panel 197 2. Press the Paper Feed d button or Paper Feed u button to select a suitable function. Press the Enter button. UNIT You can select a unit of measurement to use to display length. To select a unit, follow the steps below. While in Maintenance mode, press the Paper Feed d button or Paper Feed u button to display UNIT, and then press the Menu r button. Press the Paper Feed d button or Paper Feed u button to select a suitable unit. Press the Enter button to set the unit. CUT PRESSURE You can select a cutting pressure. SS CLEANING You can perform ultrasonic head cleaning. PWR ON ROLL PPR FEED You can save roll paper by not feeding paper after the power is on. DEFAULT PANEL You can set all setting values you made in Menu mode to their factory set value. INK INFO MENU For maintenance service person only The Control Panel 198 Chapter 5 Paper Handling Notes on Epson Special Media and Other Media Although most types of coated paper provide good printing results, the print quality varies depending on the paper quality and the manufacturer. Test the print quality before purchasing a large amount of paper. c Caution Keep fingers off the printable surface of the media, as fingerprints may reduce the print quality. Whenever possible, use gloves to handle media. Using Epson special media Epson provides special media that can enhance the usage and expressive power of the printing results. When using Epson special media, make sure the appropriate settings are made in the printer driver. For information on Epson special media, see "Paper Information" on page 326. Note: Use Epson special media in a normal room environment (temperature and humidity) for best results. When using Epson special media, read the enclosed instruction sheets first. Paper Handling 199 Storing Epson special media To keep the quality of Epson special media: Store unused media in the original plastic bag and outer package so as to avoid moisture problems. Avoid storing the media in places exposed to high temperature, humidity, or direct sunlight. Using paper other than Epson special media When you use paper other than Epson special media, or print using the RIP (Raster Images Processor), see the instructions included with the paper or RIP system, or contact your supplier for more information. Paper Handling 200 Using Roll Paper Attaching the roll paper to the spindle When installing the roll paper onto the spindle, follow the steps below. Slide the black movable flange off the end of the spindle. 2. [. . . ] A serial interface transmits data one bit at a time. interface cable The cable that connects between the computer and the printer. LCD Liquid Crystal Display. Shows various messages according to status of the printer. local printer The printer which is connected to the computer's port directly by interface cable. media Materials upon which data is printed, such as roll paper and cut sheets, plain paper, and special paper. memory The part of the printer's electronic system that is used to store information (data). Some information is fixed and is used to control how the printer operates. Information that is sent to the printer from the computer is stored in the memory temporarily. [. . . ]