User manual EPSON STYLUS PRO 9910

[. . . ] User's Guide NPD3903-00 EN Epson Stylus Pro 7900/7910/9900/9910 User's Guide Copyrights and Trademarks Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] See "Capping function" on page 81 87 Epson Stylus Pro 7900/7910/9900/9910 User's Guide Maintenance Transporting the printer When you transport the printer, be sure to repack the printer using the original box and packing materials. Setting up the printer after transporting The steps you need to take to set up the printer after transporting it are almost identical to the steps carried out the first time you set up the printer. When you set up the printer again, refer to the Unpacking and Setup Guide. c Caution: moving or transporting the printer, When keep it flat. Do not tilt it, stand it on end, or turn it upside down. Doing so may cause the ink to leak inside the printer. Also, proper operation of the printer after moving or transportation cannot be guaranteed. When transporting the printer, repack the printer using the original box and packing materials to protect it from shock and vibration. When moving or transporting this product equipped with the stand on an uneven surface, lift the printer and carry it. When moving or transporting this product equipped with the stand, check all the screws for proper tightness on the stand afterward. A B C D Make sure that the place is proper. See "Choosing a place for the printer" in the Unpacking and Setup Guide Plug in the power cable to the electrical outlet, and turn on the printer. See "Setting up" in the Unpacking and Setup Guide Perform a nozzle check to see if there are any missing dots. See "Nozzle check" on page 76 Perform the print head alignment to ensure print quality. See "Print head alignment" on page 82 88 Epson Stylus Pro 7900/7910/9900/9910 User's Guide Problem Solver Problem Solver Error Messages on the LCD Panel Error messages Messages are either status messages or error messages. Many common printer problems can be identified by the lights and messages on the LCD panel. See the following messages to solve problems. Error messages related to paper Error messages PAPER OUT LOAD PAPER Description No paper is loaded in the printer. See "Using Roll Paper" on page 31 See "Using Cut Sheet Media" on page 38 The button has been pressed without paper set in the printer. The paper runs out while printing is in progress. PAPER RELEASED LOAD PAPER PAPER SKEW LOAD PAPER PROPERLY The paper presser is released. Press the button to release the paper presser, and then set the paper. Press the button to release the paper presser, and then remove the paper. Set the paper, and then press the button. It may not be printed in the printable area properly. Press the button to release the paper presser, and then load the paper straight. See "Using Roll Paper" on page 31 See "Using Cut Sheet Media" on page 38 PAPER SETTING ERROR CHECK THE PAPER SOURCE IN THE DRIVER SETTINGS AND LOAD PAPER CORRECTLY PAPER CUT ERROR REMOVE UNCUT PAPER The paper source selected in the printer driver and the printer's control panel do not match. [. . . ] 11 Medan Phone/Fax: (62) 61-4516173 Technical Support Hotline You can also contact our technical staff at the following telephone and fax numbers: Phone: Fax: (852) 2827-8911 (852) 2827-4383 Bandung Surabaya Yogyakarta Medan 186 Epson Stylus Pro 7900/7910/9900/9910 User's Guide Where To Get Help Help for Users in Malaysia Contacts for information, support, and services are: New :For All products Help for Users in India Contacts for information, support, and services are: New :For all products World Wide Web (http://www. epson. com. my) Information on product specifications, drivers for download Frequently Asked Questions (FAQ), Sales Enquiries, questions through e-mail World Wide Web (http://www. epson. co. in) Information on product specifications, drivers for download, and products enquiry are available. Epson India Head Office Bangalore Phone: Fax: 080-30515000 30515005 Epson Trading (M) Sdn. Bhd. Head Office. Phone: Fax: 603-56288288 603-56288388/399 Epson India Regional Offices: Location Mumbai Delhi Chennai Telephone number 022-28261515 /16/17 011-30615000 044-30277500 033-22831589 / 90 040-66331738/ 39 0484-2357950 0422-2380002 020-30286000 /30286001 /30286002 079-26407176 / 77 Fax number 022-28257287 011-30615005 044-30277575 033-22831591 040-66328633 0484-2357950 NA 020-30286000 Epson Helpdesk Sales enquiries and product information (Infoline) Phone: 603-56288222 Enquiries on repair services & warranty, product usage and technical support (Techline) Phone: 603-56288333 Kolkata Hyderabad Cochin Coimbatore Pune Ahmedabad 079-26407347 Helpline For Service, Product info or to order a cartridge 18004250011 (9AM - 9PM) - This is a Toll-free number. For Service (CDMA & Mobile Users) - 3900 1600 (9AM - 6PM) Prefix local STD code 187 Epson Stylus Pro 7900/7910/9900/9910 User's Guide Where To Get Help Help for Users in the Philippines To obtain technical support as well as other after sales services, users are welcome to contact the Epson Philippines Corporation at the telephone and fax numbers and e-mail address below: Trunk Line: Fax: (63-2) 706 2609 (63-2) 706 2665 New :For All products Helpdesk Direct Line: (63-2) 706 2625 E-mail: epchelpdesk@epc. epson. com. ph World Wide Web (http://www. epson. com. ph) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and E-mail Enquiries are available. 1800-1069-EPSON(37766) Our Hotline team can help you with the following over the phone: Sales enquiries and product information Product usage questions or problems Enquiries on repair service and warranty 188 Epson Stylus Pro 7900/7910/9900/9910 User's Guide Product Information Product Information System Requirements for the Printer Driver Your computer should meet the following system requirements to use the printer driver: Mac OS X Operating system PowerPC-based Macintosh computers running Mac OS X 10. 3. 9 or later Intel-based Macintosh computers with Rosetta PowerPC G5 2GHz or higher processor 1 GB or more available memory 32 GB or more free disk space CPU Memory Hard disk space System requirements Windows Operating system CPU Memory Hard disk space Interface Windows Vista x64, Windows Vista, Windows XP x64, Windows XP, Windows 2000 Pentium 4 3 GHz or higher processor 1 GB RAM or more 32 GB or more free hard disk space USB2. 0 High Speed Ethernet 10BASE-T, 100BASE-TX Display SVGA (800 x 600) or higher resolution Connection requirements The connection requirements differ depending on the connection you use. [. . . ]