User manual EPSON STYLUS S27 START HERE

[. . . ] Follow the on-screen instructions to install the printer software. Place the ink cartridges into the cartridge holders. Do not apply excessive force to the cartridges. Once paper is loaded, follow these steps to check the print head nozzles. For Windows users 1. [. . . ] Select the icon for your printer, then click Properties on the File menu. The printer will not work with only one cartridge. Close the ink cartridge clamps until they lock into place. The printer moves the print head and begins charging the ink delivery system. This process takes about one and half minutes. While charging, the P power light flashes and the printer produces a variety of mechanical sounds. Click the Nozzle Check button, and follow the on-screen instructions. When you are finished, click OK to close the Properties dialog box. Your printer is now set up and ready to use. 2. Select the printer After you have installed the printer software, you need to select your printer. Install the printer software Load Paper and check the print head nozzles Before checking the print head nozzles, you need to load paper as shown below. When loading the paper, make sure that the paper stack fits under the tabs inside the edge guides and does not exceed the loading limit indicated by the arrow mark on the left edge guide. To adjust the left edge guide, hold down the locking tab and slide the guide against the paper stack. Make sure that the position of the edge guide allows the paper to move up and down freely. left edge guide printable side up Turning off the printer To turn off the printer, hold down the P power button until the light goes out. c Caution: Turn off all virus protection programs before you install the printer software. c Caution: Do not move the print head by hand, as this may damage the printer. 2. Remove only the yellow tape from the new ink cartridges. Make sure that printer is off, then turn on your Macintosh and insert the printer software CD in the CD-ROM drive. Double-click the Printer software folder, then double-click the Installer icon inside it. Click Continue. Color Ink Jet Printer output tray extension All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. [. . . ] EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as EPSON Approved Products by SEIKO EPSON CORPORATION. [. . . ]