User manual EPSON SURECOLOR SC-F7100 SETUP GUIDE

[. . . ] -- If fluid is swallowed, do not force the person to vomit, and consult with a physician immediately. If the person is forced to vomit, fluid may get caught in the trachea which can be dangerous. Caution ❏❏ The printer unit is heavy and unwieldy. [. . . ] Be sure the casters are not floating in air. When moving the printer, rotate the stand fixing screws in the opposite direction to raise them and then unlock the casters. Cuidado Be careful not to trap your hands or fingers when opening or closing the front cover. [8] The removed media holding plate is used when printing on media with a thickness of less than 0. 19   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [9] [10] [11] [12] The lid of the Waste Ink Bottle is required when disposing of the waste ink. 20 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [13] [14]   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  21 [15] Place the caution label for your language over the English label. 3 kg) using two persons, each holding the two bars as shown in the figure on the right. 22 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [3]   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  5 [4] Keep the four screws in the figure on the right provisionally tightened until parallel adjustment is completed. 3 kg) using two persons, each holding the two bars as shown in the figure on the right. 25 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [3] 5 [4] Keep the four screws in the figure on the left provisionally tightened until parallel adjustment is completed. 26 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [5]   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  The items shown at left are used in the following assembly. contact a service engineer to attach the “Epson Genuine Ink Supply System”. Do not assemble the “Media Guide Bar” as described in the following section until the service engineer’s work is complete. Attempting to perform these tasks yourself could result in product malfunction or damage to the product and will void the product warranty. 27 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem Media Guide Bar Barre de guidage du support Medienführungsschiene Materiaalgeleider Barra della guida di supporto Tensor Barra guia de papel a b E 5 F 4 [1] Fully tighten the two screws that you provisionally tightened. 28 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [2] a E 2 [3]   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  a E 1 [4] a E 2 Temporarily fasten the two screws as shown in the figure. 29 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [5] Fully tighten the two screws that you provisionally tightened. A minimum of two persons is required for assembly. [. . . ] 38 EN Loading Media FR Chargement des supports DE Einlegen von Medien NL Media invoeren IT Caricamento supporto ES Carga de materiales PT Carregar Papel [10] If the left end of the media is not at the center of the rectangular area as shown in the figure on the right, return to step [4]. [11] [12] [13] 39   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  EN Loading Media FR Chargement des supports DE Einlegen von Medien NL Media invoeren IT Caricamento supporto ES Carga de materiales PT Carregar Papel [14] [15] If the media is loaded printable side in, press the d button to rewind the media. We recommend that you press the r button in the control panel and set Media Suction to 2. [. . . ]