User manual EPSON SURECOLOR SC-S80610 SETUP GUIDE

[. . . ] ❏ Do not try to move the stand while the casters (wheels) and adjusters are secured. ❏ When moving the printer while it is on the stand, avoid locations with steps or uneven flooring. Caution Warnings must be followed to avoid serious bodily injury. [. . . ] See the additional print drying system manual for information on installation and package contents. Cuidado: Before assembling the printer, clear the work area by putting away the removed packing materials and bundled items. [1] [2] [3] [4] [5] 11   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  It is recommended to assemble the stand by a group of three. EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [6] [7] Printer Installation Installation de l’imprimante Druckerinstallation Printerinstallatie Installazione della stampante Instalación de la impresora Instalação da Impressora [1] Before using the printer, be sure the stand is fixed in place. When moving the printer unlock the casters. Cuidado: When carrying the printer, use at least eight persons. Cuidado: Be careful not to trap your hands or fingers when opening or closing the front cover. [8] [9] 14 EN Assembly FR Assemblage DE Montage NL Montage IT Montaggio ES Montaje PT Montagem [10] The lid of the Waste Ink Bottle is required when disposing of the waste ink. [11] [12] Place the caution label for your language over the English label. Clean the head (charge and discharge cleaning fluid) before charging it with ink. Follow the instructions in the control panel to insert and remove cleaning and ink cartridges; for information on how to insert and remove cartridges, see the following pages. Load Media is displayed when ink charging is complete. 27   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  Cleaning and ink cartridges (sold separately) are required for ink charging. Have these ready before performing the following steps. EN Initial Setup FR Configuration initiale DE Erstkonfiguration NL Eerste installatie IT Configurazione iniziale ES Instalación inicial PT Configuração inicial Observe the following precautions when cleaning the head and charging it with ink, as otherwise this step may have to be repeated, increasing the amount of ink consumed. ❏ Do not disconnect the power cable from the outlet or turn off the power. ❏ Do not perform operations other than those specified on the screen. The OR, WH, and MS cartridges for the SC-S80600 series have to be shaken more than the cartridges for other colors. [. . . ] Do not forget the administrator password. For information on what to do if you forget the password, see “Problem Solver” in the User’s Guide (online manual). 33   English  /  Français  /  Deutsch  /  Nederlands  /  Italiano  /  Español  /  Português  EN Installing the Software FR Installation du logiciel DE Installation der Software NL De software installeren IT Installazione del software ES Instalación del software PT Instalar o Software [1] Open your Web browser, and enter the IP address of the printer in the address bar. [. . . ]