User manual EPSON WORKFORCE M100

[. . . ] Do not use or store the document camera outdoors for an extended length of time, or where it may be exposed to rain, water, or excessive humidity. Do not use the document camera in places where smoke from cigarettes may be present, where it will be exposed to greasy smoke, humidity, or steam (such as cooking areas or near humidifiers), or where there is a lot of heat or dust. This can adversely affect the quality of the projected images. Caution Do not set up the document camera near high-voltage electrical wires or sources of magnetic fields. This may interfere with correct operation. Operate in the proper environmental conditions. [. . . ] · Video Format Select NTSC or PAL, depending on the video format used by your projector. · Language Changes the on-screen menu language. · Sleep Mode/Sleep Mode Timer By default, sleep mode turns the document camera off after 2 hours of inactivity. You can turn off sleep mode or change the length of time after which the camera turns off (from 1 to 6 hours). Saving Images and Displaying a Slideshow You can display a slideshow of captured images. Images are stored in the document camera's internal memory. You can store up to about 4000 images (depending on their content), and then select just the ones you want to view. You can also export captured images to an SD memory card or view them from a connected computer. a You cannot store videos on the document camera. Follow the instructions on p. 38 to record videos. Saving Images to the Internal Memory 32 a b Display the live camera image you want to save. Press the [ ] button to capture the image. Press and release when you use the remote control, press and hold when you use the control panel. You see the displayed in the upper right of the screen. The image is saved to the internal memory. a c Using the control panel, if you press and release the button without holding it, the image is frozen on the screen instead of being saved in memory. Repeat steps 1 and 2 for any additional images you want to save. Exporting Images to a Memory Card You can move captured images from the document camera's internal memory to an SD card. In the same way, select any additional images you want to rotate. All checkmarked images are rotated 90 degrees clockwise. Press the [Menu] button and select Memory. Select Internal Memory (to view images in internal memory) or SD Card (to view images on your SD card, if inserted). You see a screen like this: a d Image quality may decrease slightly after rotating an image. Also, if your photo is time-stamped, the date will be changed to a default value. Use the [ ] [ ] [ ] [ ] arrow buttons to highlight each image to be displayed in the slideshow, and press [Enter] to select it. (Press [Enter] again to deselect it. ) A checkmark is added to the selected images. a e f g A Highlight the arrow and press [Enter] to view more images To add checkmarks to all images, choose Select All. To remove all checkmarks, choose Select All again. Select Slideshow to display the first image in the slideshow. Press [ ] to return to the previous image. End the slideshow by pressing [ ] while the last image is displayed. Or press [Menu] or [Esc] to end the slideshow at any time. Using the Included Software The included software lets you use the document camera to capture still images, make time-lapse movies, record live videos with audio, and edit and play back captured files. The software also lets you annotate images from the document camera with text and graphics, and upload your videos to popular websites. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]