User manual EPSON WORKFORCE WF-6090DW

[. . . ] User's Guide NPD5258-02 EN User's Guide Copyright Copyright No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information herein. The information contained herein is designed only for use with this Epson product. [. . . ] This is because a mixture of color inks is used to create black. ❏ The ink in the ink cartridges supplied with your printer is partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and therefore these cartridges may print fewer pages compared to subsequent ink cartridges. Replacing Ink Cartridges 1. Open the front cover. 65 User's Guide Replacing Ink Cartridges and Other Consumables 2. Push the ink cartridge that you want to replace. The ink cartridge will pop out slightly. 3. Remove the ink cartridge from the printer. 4. Remove the new ink cartridge from its package. c Important: the sections shown in the illustration. Doing so may prevent normal operation and printing. Do not touch 66 User's Guide Replacing Ink Cartridges and Other Consumables 5. Shake the ink cartridge horizontally for 5 seconds, moving it back and forth about 10 cm 15 times. 6. Insert the cartridge into the printer until it clicks. Note: If Cartridge Check is displayed on the control panel, press the OK button to check if the cartridges are installed correctly. 7. Close the front cover. Related Information & “Ink Cartridge Codes” on page 64 & “Ink Cartridge Handling Precautions” on page 64 Maintenance Box Code Epson recommends the use of a genuine Epson maintenance box. The following is the code for the genuine Epson maintenance box. T6712 Maintenance Box Handling Precautions Read the following instructions before replacing the maintenance box. ❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and printing. ❏ Do not remove the film on the top of the box; otherwise ink may leak. ❏ Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak. ❏ Keep the maintenance box out of direct sunlight. ❏ Do not replace the maintenance box during printing; otherwise, ink may leak. ❏ Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the box will have solidified and no more ink can be absorbed. Replacing a Maintenance Box In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the 67 User's Guide Replacing Ink Cartridges and Other Consumables maintenance box has reached its limit. Whether and how often this is required will vary according to the number of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs. Replace the maintenance box when you are promoted to do so. The Epson Status Monitor, your LCD, or lights on the control panel will advise you when this part needs replacing. [. . . ] The latest drivers, FAQs, manuals, or other downloadables are also available from the site. http://support. epson. net/ http://www. epson. eu/Support (Europe) 132 User's Guide Appendix If your Epson product is not operating properly and you cannot solve the problem, contact Epson support services for assistance. Contacting Epson Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product manuals, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product. Epson support will be able to help you much more quickly if you give them the following information: ❏ Product serial number (The serial number label is usually on the back of the product. ) ❏ Product model ❏ Product software version (Click About, Version Info, or a similar button in the product software. ) ❏ Brand and model of your computer ❏ Your computer operating system name and version ❏ Names and versions of the software applications you normally use with your product Note: Depending on the product, the dial list data for fax and/or network settings may be stored in the product’s memory. [. . . ]