Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ESCALADE SPORTS 2L-6437-03. We hope that this ESCALADE SPORTS 2L-6437-03 user guide will be useful to you.
Lastmanuals help download the user guide ESCALADE SPORTS 2L-6437-03.
Manual abstract: user guide ESCALADE SPORTS 2L-6437-03
Detailed instructions for use are in the User's Guide.
[. . . ] OWNER'S MANUAL MANUAL
WARNING
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit.
!Do not dunk on this unit Do not hang from any part of the unit, including the backboard, rim, or net. Keep organic material away from pole base. [. . . ] Push the bolt all the way through the pole section and attach another nylon washer (#9), the other lower board arm (#4), and secure with a flat washer (#13) and hex nut (#14). Attach pull tube to lower board arms as shown in Figure 7. Use a 6" hex bolt (#17), six flat washers (#8), two spacers (#18), and a hex nut (#7). Tighten the hex nut (#7) just until it touches the washer and there is no loose space between any parts. At this time, go back and tighten hex nut (#14) from step 10 snugly, but do not overtighten. NOTE: Do not overtighten hex nuts in steps 11 and 12. The Lower Board Arms must be able to pivot freely.
Figure 7
13. Next, attach a board bracket (#10) to one of the lower board arms. Make sure to align the hole patterns exactly as shown in Figure 8. Use a hex bolt (#12), two flat washers (#8), a nylon washer (#9), and a hex nut (#7). Tighten the hex nut snugly, but do not overtighten. Repeat step 13 for the other lower board arm.
Figure 8
5
NOTE: Do not overtighten hex nuts in steps 13 and 14. The Board Brackets must be able to pivot freely.
15. Place the 4" square cap (#6) snugly over the top end of the upper pole section, and tap 1" round caps (#33) into the ends of upper board arms (#5) with the larger holes. Attach the Upper Board Arms (#5) to the upper pole section as shown in Figure 9, utilizing the holes near the top of the pole. NOTE: There are large holes in one end of the Upper Board Arms, and small holes in the other. Use a 7" hex bolt (#12), two flat washers (#13), two nylon washers (#9), and a hex nut (#14). Tighten the hex nut snugly, but do not overtighten. NOTE: Do not overtighten the hex nut (#14) in step 16. The Upper Board Arms must be able to pivot freely.
Figure 9
17. Next, attach a Board Bracket (#10) to the other end of the upper board arms as shown in Figure 10. Use a hex bolt (#11), two flat washers (#8), a nylon washer (#9), and a hex nut (#7). [. . . ] Secure with two bolts (#34), four washers (#36), two lock washers (#35), and two hex nuts (#31). Square up goal and tighten all four nuts tight. See Figure 15.
Figure 14
Detail A
Figure 15
30. Thread flange nut (#42) onto hex bolt (#46). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ESCALADE SPORTS 2L-6437-03
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ESCALADE SPORTS 2L-6437-03 will begin.
