User manual ESCALADE SPORTS G01100

[. . . ] Call us at: 1-800-426-1421 (THIS IS A CONSUMER ONLY NUMBER) FAX: 812-467-1399 OR WRITE TO: ESCALADE SPORTS CUSTOMER SERVICE DEPARTMENT P. O. BOX 889 EVANSVILLE, IN 47706 When contacting Escalade Sports please provide model number, serial number (if applicable), and part number if requesting a replacement part. These numbers can be found on the product, packaging, and in this Owner's Manual. 1 REQUIRED TOOLS PHILLIPS SCREWDRIVER STANDARD SCREWDRIVER ADJUSTABLE WRENCH OR STANDARD SOCKET SET 2 0110-C11 PARTS IDENTIFIER HARDWARE (ACTUAL SIZE MAY VARY) DESCRIPTION (EXTRA PIECES MAY BE INCLUDED) QTY. REQUIRED H1 5/16" X 1 1/4" BOLT 8 H2 H3 H4 H5 H6 H3 5/16" WASHER, BLACK FLAT 1/4" X 24 7/8" ROD 24 2 1/4" WASHER, FLAT 4 1/4" LOCK NUT 4 5/16" X 1 3/4" BOLT 16 3 PARTS IDENTIFIER ASSEMBLY PARTS DESCRIPTION QTY P1 P2 P3 P4 P5 P6 P7 P8 P9 H9 SIDE PANEL 2 END PANEL 2 PLAYING FIELD 1 RIGHT LEG LEFT LEG 4 4 PLAYING FIELD SUPPORT BRACE ROD HANDLE ROD END CAP BALL CATCHER 3/4" FLAT HEAD PHILLIPS SCREW 3 8 8 2 8 2 6 P10 BALL EXPORT CUP P9 1/2" FLAT HEAD PHILLIPS SCREW 4 0110-C11 PARTS IDENTIFIER ASSEMBLY PARTS DESCRIPTION QTY R1 R2 R3 R4 R5 R6 4 YELLOW PLAYER ROD 3 YELLOW PLAYER ROD 1 2 2 YELLOW PLAYER ROD 1 4 BLUE PLAYER ROD 1 3 BLUE PLAYER ROD 2 2 BLUE PLAYER ROD 1 ACCESSORIES DESCRIPTION QTY A1 A2 A3 SOCCER BALL 2 TOOL 1 TOOL 2 5 PARTS IDENTIFIER PRE-ASSEMBLED PARTS DESCRIPTION QTY C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 4 PLAYER ROD 2 3 PLAYER ROD 4 2 PLAYER ROD 2 ROD SPRING 16 ROD WASHERS 32 10-24 X 7/8" BOLT (used to install men) 26 10-24 LOCKING NUT (used to install men) 26 BLUE MEN YELLOW MEN 13 13 ROD BUSHING 6 32 0110-C11 ASSEMBLY INSTRUCTIONS SOCCER TABLE ASSEMBLY WARNING: TWO ADULTS NEEDED TO ASSEMBLE SOCCER TABLE Please read through the instruction book before attempting assembly to familiarize yourself with all parts and assembly steps. [. . . ] ATTACH THE TWO END PANELS P2 TO THE SIDE PANELS P1 AS SHOWN IN figure 2. REMEMBER THE GROOVE MUST FACE INWARD TOWARD THE PLAYFIELD. ATTACH THE END PANELS WITH BOLTS H6 AND WASHERS H2 INTO THE PRE-INSTALLED DOWEL CONNECTORS. TIGHTEN HARDWARE AT THIS TIME Do not over-tighten hardware!PLACE THE PLAYFIELD SUPPORTS P6 ON THE BOTTOM OF THE PLAYFIELD. INSERT SUPPORT RODS H3 THROUGH THE HOLES IN THE SIDE PANELS AND THE GROVE IN THE PLAYFIELD SUPPORTS P6 AS SHOWN IN figure 3. PLACE WASHER H4 AND LOCKNUT H5 ON EACH END OF SUPPORT RODS H3. CAUTION: P1 P3 STEP 4 P1 P2 H2 H6 P1 FIGURE 2 P4 STEP 5 P5 H9 P5 P6 P9 P4 H2 H1 FIGURE 3 9 H3 H4 H5 ASSEMBLY INSTRUCTIONS SOCCER TABLE ASSEMBLY WARNING: TWO ADULTS NEEDED TO ASSEMBLE SOCCER TABLE 6. THERE ARE TWO RIGHT LEGS P4 AND TWO LEFT LEGS P5. THE WIDER SIDE OF THE LEG IS BOLTED TO THE SIDE PANELS P1. THE LEGS ARE ATTACHED WITH BOLTS H1 AND WASHERS H2. THE THREADED T-NUTS ARE PRE-ASSEMBLED IN THE LEGS. TIGHTEN HARDWARE AT THIS TIME. Do not over-tighten hardware!INSTALL BALL CATCHERS P9 UNDER TABLE AS SHOWN IN STEP 6. ATTACH THE BALL CATCHERS P9 TO THE END PANELS P2 USING SCREWS H9 (3/4" FLAT HEAD PHILLIPS SCREW). CAUTION: STEP 6&7 P4 H2 H1 FIGURE 4 P5 H9 P5 P6 P9 P4 H3 H4 H5 This step requires two adults!Very carefully turn the table over and set on its legs. Be careful. The table is very heavy and the rods will slide. Do not lift the table by holding onto the rods. WARNING: 10 0110-C11 ASSEMBLY INSTRUCTIONS SOCCER TABLE ASSEMBLY WARNING: TWO ADULTS NEEDED TO ASSEMBLE SOCCER TABLE 8. ATTACH BALL RETURN CUP P10 TO THE OUTSIDE OF THE END PANEL P2 USING SCREWS H10. PUSH ON ROD HANDLES P7 ON THE ROD ENDS WITH THE HOLES. PUT ROD CAPS P8 ON OTHER END OF ROD. 9. [. . . ] If a ball is spinning in place, it is not considered a dead ball. 12 0110-C11 90 DAY WARRANTY Manufacturer warrants to the original retail purchaser, this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product become defective due to material or workmanship within the warranty period, contact our Customer Service Department. This warranty is not transferable and does not cover normal wear and tear, or damage caused by improper handling, installation, or use of this product. This warranty is also void if product is in any way abused, damaged, or modified from its original state, or if used for other than indoor residential use. [. . . ]