User manual ESCALADE SPORTS G01860

[. . . ] These numbers are located on the product, packaging, and in this owners manual. Your Model Number _______________________ Your model number is located on the original carton, this owners manual, and under the table. Please retain these instructions for ordering parts. G01860 IMPORTANT! [. . . ] Do not tighten hardware until the instructions indicate so. Do not overtighten hardware, as you could damage the finish on the table 6. Some drawings or images in this manual may not look exactly like your product. You can apply spray furniture polish to a cloth and wipe down the rods to make them slide more easily in the bearings. READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO ADULTS ARE NEEDED TO PUT THIS GAME TABLE TOGETHER! © 2002 Escalade Sports 2 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 3 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 4 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 5 For Customer Service Call 1-866-556-2759 1. Find a clean, level place to begin the assembly of your game table. We recommend building the table on the box top to protect the parts during assembly. 2. Place the main cabinet P1 upside down as shown in Figure 1. Unfold the side aprons P1A and place the end panel P2 as shown. Attach the L- bracket P12 in the corner with screws H4. Figure 1 Make sure you align the holes for the legs when installing the L-bracket. 3. Attach the legs P3 in the corners as shown in Figure 2 using bolts H1 and washers H2. Start all leg bolts by hand before you tighten any of the bolts. MAKING SURE END PANELS ARE STRAIGHT TIGHTEN ALL HARDWARE AT THIS TIME. 4. After the legs are tight attach the hinges to the main cabinet using screws H4. Figure 2 5. Attach the goal boxes P4 to the end panels using screws H3. Center the goal box over the opening in the end panel as shown in Figure 3. 6. Screw one leg leveler H7 into the bottom of each leg as shown in Figure 3. Figure 3 © 2002 Escalade Sports 6 For Customer Service Call 1-866-556-2759 THIS STEP REQUIRES TWO OR MORE ADULTS. VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY AND THE RODS WILL SLIDE. DO NOT LIFT THE TABLE BY HOLDING ONTO THE RODS 7. Attach the ball entry cup P7 and ball entry cup socket P8 to the table as shown in Figure 4 using screws H3. The two parts will screw together. Figure 4 8. Attach one handle P6 to each rod using screws H6 as shown in Figure 5 The handle end of the rod has the hole closest to the end. Figure 5 NOTE: PLEASE USE THE DIAGRAM ON THE FOLLOWING PAGE TO SET UP THE PLAYERS ON THE TABLE. START ON ONE SIDE OF THE TABLE AND COMPLETE ONE TEAM AT A TIME. © 2002 Escalade Sports 7 For Customer Service Call 1-866-556-2759 9. Using the diagram below for the correct order of the rods, install the players P9 and P10, and the rod bushings P11 as shown in Figure 6. Start with the far left hole on one side of the table and choose a team color to begin your setup. Slide a 3 player rod P14 into the far left hole of the table. [. . . ] If the ball rolls into the serving cup and then returns to the playing surface, it is still considered "in play. " Dead Ball If a ball has completely stopped its motion and cannot be reached by any player figure, it is declared a "dead ball. " If the ball is declared dead between the goal and the 2-man rod, it should be put back into play by placing it in nearest corner and releasing it. If the ball is declared dead anywhere else on the playing surface, it should be put back into play by a serve from the team that originally served the ball. If a ball is spinning in place, it is not considered a dead ball. © 2002 Escalade Sports 9 For Customer Service Call 1-866-556-2759 Model # G01860 PRODUCT PARTS LIST Part # H1 H2 H3 H4 H5 H6 H7 H8 H9 P1 P1A P2 P3 P4 P5 P6 P7 P8 Description 3/8 x 1-3/4 Bolt 3/8 Flat Washer 5/8 Round Head Screw 5/8 Flat Head Screw 1-1/4 Flat Head Screw 3/16 x 3/4 Flat Head Screw Leg Leveler 5/32 Lock Nut 5/32 x 1-1/4 Bolt Main Cabinet Side Panel End Panel Leg Goal Box Manual Scorer Rod Handle Ball Entry Cup Ball Entry Cup Socket Qty. [. . . ]