User manual ESCALADE SPORTS G01900

[. . . ] HARDWARE PARTS IDENTIFIER ( ACTUAL SIZE MAY VARY ) DESCRIPTION QTY. REQUIRED (EXTRA PIECES MAY BE INCLUDED) H1 H2 H3 H4 1/4" X 28-1/2" CABINET ROD 3 5/16" WASHER 8 LEG LEVELER 1/4"x1/2" NUT 4 6 H5 H6 5/16"x2" BOLT 3/4"FLAT HEAD SCREW 8 8 H7 PART NOT SHOWN ACTUAL SIZE 3/8"x1-3/4" BOLT 16 For Customer Service Call 800-426-1421 3 PARTS IDENTIFIER HARDWARE ( ACTUAL SIZE MAY VARY ) (EXTRA PIECES MAY BE INCLUDED) H8 H9 H10 3/8" WASHER, BLACK FLAT 1/2"ROUND HEAD SCREW 5/8"ROUND HEAD SCREW 22 8 6 H11 1 1/2"FLAT HEAD SCREW 4 ASSEMBLY PARTS DESCRIPTION QTY P1 P2 P3 P4 SIDE PANEL 2 END PANEL 2 PLAYING FIELD 1 LEG 4 For Customer Service Call 800-426-1421 4 ASSEMBLY INSTRUCTIONS ASSEMBLY PARTS DESCRIPTION QTY 3 P5 P6 P7 P8 P9 P10 PLAYFIELD SUPPORT BRACE HANDLE ROD END CAP 8 8 BALL ENTRY CUP 2 BALL CATCHER 2 BLOCK STYLE MANUAL SCORER 2 For Customer Service Call 800-426-1421 5 ASSEMBLY PARTS PARTS IDENTIFIER DESCRIPTION QTY 1 1 R1 R2 R3 R4 R5 R6 2 HOME PLAYERS ROD 2 AWAY PLAYERS ROD 3 HOME PLAYERS ROD 2 3 AWAY PLAYERS ROD 2 5 HOME PLAYERS ROD 1 5 AWAY PLAYERS ROD DESCRIPTION 1 QTY 4 1 ACCESSORIES A1 A2 A3 SOCCER BALL TOOL TOOL 2 For Customer Service Call 800-426-1421 6 PRE-ASSEMBLED PARTS PARTS IDENTIFIER C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 DESCRIPTION 5 PLAYER ROD QTY 2 3 PLAYER ROD 4 2 PLAYER ROD RUBBER BUSHING 2 16 PLASTIC ROD WASHERS 16 10-24 X 1-1/4"BOLT (used to install men) 26 10-24 LOCKING NUT (used to install men) 26 AWAY MEN HOME MEN 13 13 ROD BUSHING 16 For Customer Service Call 800-426-1421 7 SOCCER TABLE ASSEMBLY Please read through the instruction book before attempting assembly to familiarize yourself with all part and assembly steps ASSEMBLY INSTRUCTIONS IMPORTANT: WARNING: TWO ADULTS NEEDED TO ASSEMBLE SOCCER TABLE 1 CUT THE CORNERS ON THE BOX TOP AND PLACE IT ON THE FLOOR TO PROTECT THE PARTS AS THE UNIT IS BEING ASSEMBLED. PLACE SIDE PANELS P1 UPSIDE DOWN WITH THE SLOT FACING INWARD AS SHOWN IN figure 1A . [. . . ] 4 INSERT PLAY FIELD SUPPORT BRACES INTO THE NOTCHES ON THE SIDE PANELS. SLIDE THE PLAYFIELD SUPPORT RODS H1 THROUGH THE GROOVE IN THE SUPPORT BRACES. SECURE WITH WASHER H8, NUT H4 DO NOT TIGHEN AT THIS TIME !P1 STEPS 1, 4 Hole 3 PLAYERS ROD: R3 2 PLAYERS ROD: R1 3 PLAYERS ROD: R4 5 PLAYERS ROD: R5 5 PLAYERS ROD: R6 3 PLAYERS ROD: R3 2 PLAYERS ROD: R2 3 PLAYERS ROD: R4 FIGURE 1A For Customer Service Call 800-426-1421 9 SOCCER TABLE ASSEMBLY ASSEMBLY INSTRUCTIONS WARNING: TWO ADULTS NEEDED TO ASSEMBLE SOCCER TABLE 5 ATTACH TWO END PANELS P2 AS SHOWN IN figure 2. IN BOTH CASES REMEMBER THE GROVE MUST FACE INWARD TOWARD THE PLAYFIELD. ATTACH THE END PANELS WITH BOLTS H5 AND WASHERS H2 INTO THE PRE-INSTALLED DOWEL CONNECTORS. 6 ATTACH PLAYFIELD WITH SCREWS H6 DEPENDING ON THE NUMBER OF HOLES IN THE PLAYFIELD ENDS. SEE figure 2. STEP 5 P1 P5 P3 P1 H1 H8 H4 FIGURE 1B H6 P1 P2 P1 H2 P2 H5 P3 FIGURE 2 For Customer Service Call 800-426-1421 10 ASSEMBLY INSTRUCTIONS SOCCER TABLE ASSEMBLY WARNING: TWO ADULTS NEEDED TO ASSEMBLE SOCCER TABLE 7 ATTACH LEGS AS SHOWN IN figure 3. SOME MODELS HAVE AN ANGLED EDGE ON THE LEGS. IF YOUR MODEL INCLUDES LEGS WITH AN ANGLED EDGE THIS EDGE FACES THE OUTSIDE CORNER. THE THREADED T-NUTS ARE PRE-ASSEMBLED IN THE LEGS. INTO THE BOTTOM OF EACH LEG 9 ATTACH PLASTIC GOAL BOXES TO THE END PANELS WITH SCREWS H9 USE THE PILOT HOLES TO CORRECTLY LOCATE THE GOAL BOX AS SHOWN IN figure 3. This step requires two adults!Very carefully turn the table over and set on its legs. Be careful the table is very heavy and the rods will slide . [. . . ] IF SPRAY WAX DOES NOT HELP, THE TABLE MAY NOT BE SQUARE. LOOSEN THE HARDWARE ON THE SIDE PANELS AND LEGS TO RE-ALIGN THE TABLE. SHOULD THE PLAYFIELD HAVE A BOW IN IT, YOU CAN LOOSEN THE PLAYFIELD SUPPORT RODS TO RELAX THE PLAYFIELD. For Customer Service Call 800-426-1421 13 [. . . ]