User manual ESCALADE SPORTS G03236

[. . . ] These numbers are located on the product, packaging, and in this owners manual. Your Model Number _______________________ G03236 1 © 2003 Escalade Sports For Customer Service Call 1-866-556-2758 IMPORTANT!READ THIS MANUAL ALL THE WAY THROUGH BEFORE BEGINNING TO PUT YOUR GAME TABLE TOGETHER!THEN READ EACH STEP BEFORE STARTING THAT STEP. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS GAME TABLE Tools Required: Wrench H8 Included with the Hardware Kit Philips Screwdriver Furniture Polish and Cloth An electric screwdriver is helpful in assembly. [. . . ] Tighten all hardware at this time. © 2003 Escalade Sports 5 For Customer Service Call 1-866-556-2758 THIS STEP REQUIRES TWO OR MORE ADULTS. VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY. 6. After you have turned the table over, feed the phone type plugs from under the table through the large holes in the rail and plug them into the bottom of the electronics P5 as shown in FIGURE 3. Attach the electronics P5 to the main cabinet using screws H4 as shown in FIGURE 3. Figure 3 Note: See page 7 for Operation of the Electroinics. 7. After you have attached the electronic scorer, set the table where you want it in your Game Room. Plug the cord into a suitable 120v household outlet and turn the motor on by turning the switch that is built into the cord. © 2003 Escalade Sports 6 For Customer Service Call 1-866-556-2758 Congratulations!You have now assembled your hockey table. Please note the Care and Use instructions below to ensure many years of trouble free use of your game table. CARE AND USE OF YOUR TABLE 1. Apply spray furniture polish to a clean cloth and wipe down the playfield to make the pucks slide faster on the table. You may use spray furniture polish to clean all exterior surfaces of your game table. Use only a suitable 120v AC household outlet. This product is intended for INDOOR use only. DO NOT operate the motor if the cord is damaged in any way. This will damage the legs OPERATION OF THE ELECTRONICS 1. Plug the adapter included with your table into a suitable 120V outlet and the back of the electronic unit. You may also install 4 AA batteries (Not included) into the back of the unit. Make sure all connections are tight and completely plugged into the unit. Turn the power switch on the front of the electronics to the ON position. Wait for the unit to run its test cycle. [. . . ] Or Write us at: Escalade® Sports, Inc. Box 889, Evansville, IN 47706 Attn: Warranty Dept. Or E-mail us at: tablehockey@escaladesports. com Other than shipping requirements no charge will be made for such repair or replacement of inwarranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for value prior to mailing. WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE ABOVE 90 DAY PERIOD. [. . . ]