User manual ESCALADE SPORTS G03421

[. . . ] We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, DO NOT RETURN IT TO THE STORE, please contact us toll free @: 1-866-556-2758 FAX: 1-866-873-3530 tablehockey@escaladesports. com Please have your model number when inquiring about parts. Or write to: Escalade Sports Customer Service Department P. O. Box 889 Evansville IN 47706 When contacting Escalade Sports please provide your model number, serial number (if applicable), and part number if requesting a replacement part. [. . . ] You can apply spray furniture polish to a cloth and then wipe down the playfield to make the pucks slide easier on the table. Only plug the table motor into a suitable 120v AC household outlet. This product is intended for INDOOR use only. READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO ADULTS ARE NEEDED TO PUT THIS GAME TABLE TOGETHER! © 2002 Escalade Sports 2 For Customer Service Call 1-866-556-2758 © 2002 Escalade Sports 3 For Customer Service Call 1-866-556-2758 © 2002 Escalade Sports 4 For Customer Service Call 1-866-556-2758 1. Find a clean, level place to begin the assembly of your hockey table. We reccomend building the table on the box top to protect the parts during assembly. 2. Attach 2 leg panels P3 to each side of the legs P2 using screws H6 as shown in FIGURE 1. CAUTION: DO NOT OVERTIGHTEN THE LEG PANEL SCREWS Figure 1 3. Attach the previously made leg assemblies to the main cabinet P1 using bolts H1 washers H2 and nuts H3. There are 4 bolts 8 washers and 4 nuts per leg assembly. 4. Attach the blower motor and grill P10 in the center of the main cabinet using screws H2 as shown in FIGURE 2. 5. Screw one leg leveler P6 to the bottom of each leg as shown. Figure 2 © 2002 Escalade Sports 5 For Customer Service Call 1-866-556-2758 Note: Place all of the aprons and corners posts onto the main cabinet to ensure fit and finish before you attach any of the parts. 6. Attach the end aprons P5 and side aprons P4 to the main cabinet using screws H7 as shown in FIGURE 3. 7. Attach the corner posts P7 to the aprons with screws H5 as shown in FIGURE 3. Figure 3 8. Attach one puck catcher P8 to each end panel using screws H5 as shown in FIGURE 4. [. . . ] One point is awarded when a puck is shot into the opponent's goal. © 2002 Escalade Sports 7 For Customer Service Call 1-866-556-2758 Model # G03421 PRODUCT PARTS LIST Part # H1 H2 H3 H4 H5 H6 H7 P1 P2 P3 P4 P5 P6 P7 Description 3/8 x 4-1/2 Bolt 3/8 Flat Washer 3/8 Hex Nut 2-3/4 Round Head Screw 1/2 Round Head Screw 3/4 Round Head Screw 1-1/2 Round Head Screw Main Cabinet Leg Leg Panel Side Panel End Panel Leg Leveler Apron Corner Qty. 8 16 8 2 22 24 18 1 4 4 2 2 4 4 Part# P8 P9 P10 A1 A2 A3 A4 C1 C2 C3 C4 C6 K1 Description Puck Catcher (With Wires) Electronic Scorer Blower Moter & Grill Striker Felt Pad Puck Tool Blower Motor Grill Junction Box With Cord Red Plastic Goal Adapter Wire Set Hardware Kit Qty. 2 1 1 4 4 4 1 1 1 2 1 1 1 © 2002 Escalade Sports 8 For Customer Service Call 1-866-556-2758 [. . . ]