User manual ESCALADE SPORTS G05955

[. . . ] These numbers are located on the product, packaging, and in this owners manual. Your Model Number _______________________ Your model number is located on the original carton, this owners manual, and under the table. Please retain these instructions for ordering parts. G05955 IMPORTANT! [. . . ] Do not overtighten hardware, as you could damage the finish on the table 6. Some drawings or images in this manual may not look exactly like your product. You can apply spray furniture polish to a cloth and wipe down the rods to make them slide more easily in the bearings. READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO ADULTS ARE NEEDED TO PUT THIS GAME TABLE TOGETHER! © 2002 Escalade Sports 2 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 3 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 4 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 5 For Customer Service Call 1-866-556-2759 © 2002 Escalade Sports 6 For Customer Service Call 1-866-556-2759 1. Find a clean, level place to begin the assembly of your game table. We recommend building the table on the box top to protect the parts during assembly. 2. Place one side panel P1 upside down with the finished side facing out as shown. The ball entry hole will be closest to the floor. To ease assembly, push the rubber bushings on the rods up against the men. Figure 1 3. The handle end of the rod has a hole close to the end of the rod. There will be four handles (one team) on each side of the table. Remember, the goalie rod is always in your left hand when the table is in the upright position and you are working upside down so it will be opposite during assembly. Figure 2 4. Once you are sure you have the players set up correctly, slide the other side panel P1 on the other end of the rods as shown. Set the playfield P3 onto the assembly with the graphics facing down. Insert the playfield into the groves on the side panels. 5. 6. Attach the two end panels P2 as shown in Figure 3 using bolts H7 washers H8 and barrel nuts H6. Remember to start all bolts by hand first before you tighten anything. MAKING SURE END PANELS ARE STRAIGHT TIGHTEN ALL HARDWARE AT THIS TIME. 7. Figure 3 Place the playfield support braces P6 on the bottom of the playfield as shown in Figure 3. Slide the playfield support rods H3 through the side panel and the grove in the support braces. Secure with washers H5 and nut H4. © 2002 Escalade Sports 7 For Customer Service Call 1-866-556-2759 8. Place the hockey table P7 upside down on a clean surface. [. . . ] Center the ball catcher over the opening in the end panel. THIS STEP REQUIRES TWO OR MORE ADULTS. VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY. © 2002 Escalade Sports 8 For Customer Service Call 1-866-556-2759 PRODUCT PARTS LIST Part # H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 P1 P2 P3 P4 P5 P6 P7 P8 P8A P9 P10 P11 P12 R1 R2 R3 Description 5/16 X 1-1/8 Bolt 5/16 Flat Washer 1/4 x 24-7/8 Cabinet Rod 1/4 Lock Nut 1/4 Flat Washer 3/16 Barrel Nut 3/16 x 1-3/4 Bolt 3/16 Flat Washer 5/8 Round Head Screw 5/8 Washer Head Screw 1" Washer Head Screw 2-1/4 Flat Head Screw Side Panel End Panel Playfield Right Leg Left Leg Playfield Support Brace Hockey Table Leg Panel Spreader Rod End Cap Rod Handle Ball Catcher Fan Motor Two Player Rod Color 1 Three Player Rod Color 1 Four Player Rod Color 1 Qty. [. . . ]