User manual ESCALADE SPORTS G07100

[. . . ] These numbers are located on the product, packaging, and in this owners manual. Your Model Number _______________________ Your model number is located on the original carton, this owners manual, and under the table. Please retain these instructions for ordering parts. G07100 © 2002 Escalade Sports 1 For Customer Service Call 1-866-556-2759 IMPORTANT! [. . . ] We recommend building the table on the box top to protect the parts during assembly. Place the main cabinet P1 on the ground with the playing side down. Apply glue P12 to ALL the edges and ends of the long rail sections P1A and P1B and the short rail sections P1C, P1D, and P1E that will be attached to one another. Attach long rail sections P1A and P1B to each short rail sections P1C, P1D, and P1E with flat head screw H3 as shown in Figure 1. DO NOT OVER TIGHTEN SCREWS. Figure 1 © 2002 Escalade Sports 6 For Customer Service Call 1-866-556-2759 CAUTION: Attach all parts by hand with the hardware hand tight before tightening any hardware. 5. Attach two legs P2A and P2B to the return end of the table using bolts H1 and washers H8 as shown in Figure 2. Make sure you start all bolts by hand before you tighten anything. Figure 2 6. Attach two legs P2A and P2B to the other end of the table using bolts H1 and washers H8 as shown in Figure 3. Make sure you start all bolts by hand before you tighten anything. Figure 3 © 2002 Escalade Sports 7 For Customer Service Call 1-866-556-2759 7. Attach the two spreaders P3 and the two end panels P4 as shown in Figure 4 using bolts H2 washers H9 and nuts H5. 8. Attach one leg leveler P5 to the bottom of each leg as shown in Figure 4. Figure 4 9. Lay the apron side panels P7A and P7B on a flat surface with the woodgrain side facing out and the screw holes at the bottom of the panels. MAKE SURE YOU HAVE THE GROOVE RUNNING DIAGONALLY FROM LEFT TO RIGHT ON EACH PANEL AS SHOWN IN FIGURE 5. 10. Attach the two apron corners P10 with the arrows facing up to the side panels P7A and P7B using screws H4 as shown in Figure 5. Figure 5 © 2002 Escalade Sports 8 For Customer Service Call 1-866-556-2759 11. Position the apron side panels P7A and P7B on the main cabinet P1 as shown in Figure 6. The panels are positioned correctly when the apron corners P10 rest inside the corner caps that are attached to the main cabinet. Once you have the side panels placed correctly, attach them to the main cabinet using screws H3 as shown in Figure 6. Slide the apron end panel P8 into each apron corner P10 and attach to apron corners using screws H4. Next attach the apron end panel to the main cabinet P1 using screws H3 as shown in Figure 6. With the rubberized sides of the long return boards P6A and P6B facing the playfield slide them in the groves of the apron side panels and the long rails. Make sure you have the angled corners towards the aprong corners P10. Figure 6 © 2002 Escalade Sports 9 For Customer Service Call 1-866-556-2759 14. Attach two apron corners P10 to each end of apron ball return panel P9 using screws H4. Position the apron corners so the screw hole is not in line with the groove for the apron ball return panel P9. 15. [. . . ] Using a capenders level or rolling a pool ball on the surface, level the table by turning the leg levelers P5. 20. Using two pieces of string put the playfield spots A6 on the table as shown. Align with the second sight on the side rail and the center sight on the end rail. © 2002 Escalade Sports 11 For Customer Service Call 1-866-556-2759 PRODUCT PARTS LIST Part # H1 H2 H3 H4 H5 H6 H7 H8 H9 P1 P1A P1B P1C P1D P1E P1F P2A P2B P3 Description 5/16 x 1-1/4 Bolt 1/4 x 1-1/4 Bolt 1-1/4 Flat Head Screw 5/8 Round Head Screw 1/4 Hex Nut 1" Round Head Screw Bracket 5/16 Flat Washer 1/4 Flat Washer Main Cabinet Long Rail (Right) Long Rail (Left) Short Rail Ends W/Hole Short Rail Center Short Rail Return End Hinge Right Leg Left Leg Spreader Qty. [. . . ]