User manual ESCALADE SPORTS M01300

[. . . ] When installing parts that have more than one bolt, start ALL the bolts in that part by hand before tightening anything. Some drawings or images in this manual may not look exactly like your product. Please read and understand the text before starting each assembly step. READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND SAFETY INSTRUCTIONS CAREFULLY. [. . . ] AT LEAST TWO ADULTS ARE NEEDED TO PUT THIS GAME TABLE TOGETHER. 2 3. 5mm (6) M4 (2) M4 (2) M4 (2) M6 (16) M6 r (16) 3. 5mm (4) (1) ch(1) 3mm (4) H11 3. 5mm (10) H12 3. 5mm crew (10) H13 3. 5mm © 2005 Escalade Sports (4) H14 3mm 3 (2) H15-4. 0mm Plastic Nail (8) For Customer Service Call 1-888-996-2729 (1) (2) (2) (2) (2) (2) (2) P8 - Player Rod E (2) (10) (10) (10) (10) (4) (2) (1) P16 - Short Stick Player Red (4) P17 - Goalie Red (1) P18 - Long Stick Player Blue (1) P19 - Short Stick Player Blue (4) P20- Goalie Blue (1) P21 - Support Brace (1) P22 - Scorer (2) P23-PVC Apron Mantle (2) P24-PVC Top Mantle (2) (4) c 2005 Escalade Sports 5 For Customer Service Call 1-888-996-2729 1. Find a clean, level place to begin the assembly of your game table. We recommend building the unit on the box top to protect the parts during assembly. Place the main cabinet P1 up side down as shown in FIGURE 1. Attach the goalie handle P3 to the main cabinet using bolt H2, two washers H4 and lock nut H3. Do not over tighten, the handle must be able to pivot. Attach the puck catcher P2 to the cabinet using screws H1 as shown in FIGURE 1. Repeat steps 3 and 4 for both ends of the table. Figure 1 6 6. Attach the scorers P22 to the table using screws H10. H10 Screws P22 Scorer P14 Goal H13 Screw Figure 4 © 2005 Escalade Sports 9 For Customer Service Call 1-888-996-2729 15. Slide the players onto the metal tabs on the gear assemblies. Set the players as shown below in FIGURE 5. Note that there is one long stick blue player and one long stick red player. These must be placed as shown for the game to function correctly. P18 Long Stick Blue Player P17 Red Goalie P16 Short Stick Red Player P20 Blue Goalie H14 Bolt P15 Long Stick Red Player P19 Short Stick Blue Player Figure 5 10 16. Tear off the membrane on the apron mantle P23 17. Slide the apron mantle into the slot pre-set on the long apron on both sides accordingly P23 Apron Mantle Figure 6 © 2005 Escalade Sports 11 For Customer Service Call 1-888-996-2729 18. Tear off the membrane on the top mantle P24 19. Connect the two top mantles together with the plastic nails H15. 20. Insert one end of top mantle that has connected together into the slot on short side apron then arrange it onto the top of the side mantle. Next, insert the other end of the top mantle into the slot at the other end of the apron. Make sure the top and side mantle can connect closely. H15 P24 PVC Top Mantle P24 Top Mantle Figure 7 12 Congratulations! [. . . ] Make sure the top and side mantle can connect closely. H15 P24 PVC Top Mantle P24 Top Mantle Figure 7 12 Congratulations!You have now assembled your rod hockey table. Please note the Care and Use instructions below to insure many years of trouble free use of your game table. CARE AND USE OF YOUR TABLE 1. [. . . ]