User manual EUREKA 4870

[. . . ] Upright Vacuum Cleaner Household Type IMPORTANT Do not return this product to the store. For assembly problems or questions contact: Eureka's Customer Service Division toll free at 1-800-282-2886*, 8 a. m. to 7:30 p. m. , (CST), Monday Friday and 10 a. m. For replacement of broken or missing items to be shipped direct to you, call 1-800-438-7352*, 8 a. m. to 4:45 p. m. , Central Standard Time, Monday through Friday. [. . . ] Check for source of overheating problem (i. e. full bag, clogged hose, clogged tubes or clogged filter). If a full bag, clogged hose, clogged tube or clogged filter is found, replace the bag, unclog the hose or replace the filters. Wait at least 30 minutes before attempting to reuse the cleaner. After 30 minute cool down period, plug the cleaner in and push the rocker switch to the on (I) position. If the cleaner still does not operate, take it to any Eureka Authorized Service Center for repair. 8 How To Use Accessories NOTE: Place cleaner on floor with the handle in storage position while using accessories. Do not place cleaner on furniture or steps. Dusting Brush is for furniture, blinds, books, lamp shades, shelves. 1. Place desired accessory onto end of hose or wand. Dusting Brush Upholstery nozzle is for curtains, draperies, cushions, fabrics. Upholstery Nozzle Crevice tool cleans corners, baseboards, between cushions. Crevice Tool Extension wands Nested extension wands to add reach. · Grasp both wands near ridges. · Pull apart. · Turn ridge end to center. · Push wands together. 9 How to Remove and Check Clear Tubes Low suction or poor pickup may be due to a blockage in the vacuum cleaner. Move hose/floor valve (A) to hose position. Remove hose (B) and check suction at end of hose - if little or no suction, check disposable dust bag and filters. NOTE: Turn off the switch and unplug the electrical cord before checking tubes. To Check Large base hose coming from hood, go directly to step 3. Turn quarter turn fastener (C) to unlock. Pull small clear tube (E) down and away from cleaner. At hose/clear tube connection, rotate twist lock (F) to release tube. Remove large clear tube (G) by swinging back and pulling down and away from cleaner. At large hose/clear tube connection, rotate twist lock (H) to release tube. Check for blockages in both clear tubes (E/G) and both hoses (I). Make sure all parts are completely dry prior to reassembling. D A B G E F C F H I I 10 How to Reassemble Clear Tubes 11. Reattach both clear tubes (J) (push and twist) to hoses (I) on cleaner. [. . . ] In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7. If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the Eureka Authorized Warranty Station. Return shipping charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type, and serial number from the data plate on the cleaner. Further Limitations and Exclusions Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any warranty for Fitness For A Particular Purpose is limited to the duration of this warranty. [. . . ]