User manual EUREKA 6989A

[. . . ] They are located on the silver rating plate on your cleaner. For prompt and complete service information, always refer to those numbers when inquiring about service or ordering parts and accessories. When using an electrical appliance, basic precautions should always be followed, including the following: Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and before servicing. [. . . ] Step : Place hose handle into wands until plug connects and button locks (A). Step : Insert end of hose into top of canister (M). Step 6: Pull power supply cord (Y) out from back of cleaner and plug into electrical outlet. To rewind, remove from electrical outlet, step on cord reel button, hold and guide plug while it rewinds (L). Note: A carpet should be cleaned regularly over heavily traveled areas, and once a week over the entire carpeted area. Vacuum slowly, making several passes (forward and backward) over the carpet. The time required to clean the carpet will depend on several factors ­ including type of carpet and amount of dirt. Step 1: Step on handle release on the motorized nozzle to release handle; pull back to comfortable work position (E). step : Push ON/OFF Button on Hose Handle (A). Step : Select bare floor or carpet cleaning selection on hose handle. Step : Use the variable speed control (K) to adjust suction power when cleaning areas like rugs or drapes. Step 7: Position hood; secure with screws. The paper bag and filters are important for the function of the vacuum cleaner. If the paper bag or filters become clogged, no air can pass through the cleaner and no cleaning takes place regardless of how powerful the unit. for maximum efficiency , change the dust bag frequently and clean the filters as necessary. Some fine particles can restrict airflow very quickly and will decrease performance even before the bag appears to be full. When vacuuming carpet fresheners or cleaners, plaster dust, or similar fine substances, clean the bag and filters more often. Certain types of fine particles like powder, plaster dust, or carpet fibers can restrict airflow very quickly and will decrease performance even before the bag appears to be full. When the warning appears, change the disposable dust bag to restore maximum performance. If a clean dust bag does not restore maximum performance, clean the filters and check the hose and wands for obstructions. CAUTION: Turn off the power switch and disconnect electrical cord from wall socket before changing dust bag. Never use the cleaner without a dust bag or filters. [. . . ] Clean hair and thread from bristles and end cap area. Remove any clogs from the hose that restrict the airflow. For bare floor cleaning, make sure switch control is in bare floor position. Empty the dust cup and/or change the bag. [. . . ]