User manual EURO-PRO 7130

[. . . ] Keep fingers away from all moving parts. Special care is required around the sewing machine needle. The wrong plate can cause the needle to break. Do not pull or push fabric while stitching. [. . . ] How to drop feed dog For ordinary sewing, keep the feed dog up, for freehand embroidery, sewing on buttons and darning, drop the feed dog. Heavy woollens, overcoat fabrics, upholstery fabrics, some leathers and vinyls. Most threads sold are medium size and suitable for these fabrics and needle sizes. IMPORTANT: Match needle size to thread size and weight of fabric NEEDLE, FABRIC SELECTION NEEDLES HA 1 15 1 15 1/705H (SIN) EXPLANATION Standard sharp needles. Can be used instead of 15 1 for sewing all fabrics. (Leaves smaller hole than standard large needle. When sewing with twin needles, the stitch width dial should be set at less than "2. American and Japanese needles show size 9, 11, 12 etc. Replace needle often (approximately every other garment ) and / or at first thread breakage or skipped stitches. How to choose your pattern 1 2 For straight stitch select pattern "A" with pattern selector dial (4). adjust the stitch length with the stitch length dial (2). You may choose any needle position, by turning the stitch width dial (1). for zigzag stitch , select pattern "B" with pattern selector dial (4). Adjust the stitch length (2) and stitch width (1) according to the fabric being used. To obtain any of the other patterns shown in the upper row on the stitch selection panel, select the letter above the stitch with the pattern selector dial. Adjust the stitch length and the stitch width with the control dials according to the result desired. To obtain any of the patterns on the second row, turn the stitch length dial to "S", select the pattern desired with pattern selector dial, and adjust the stitch width with the stitch width dial. Turn the pattern selector dial so that the stitch display shows the straight stitch position. Generally speaking, the thicker the fabric, thread and needle, the longer the stitch should be. Choose your needle position, from center position to left needle position by changing the stitch width dial (1) from "0" to "5". Function of stitch width dial The maximum zigzag stitch width for zigzag stitching is "5"; however, the width can be reduced on any pattern. The width increases as you move zigzag dial from "0" - "5". [. . . ] Your sewing machine offers excellent stitch quality on a wide range of fabrics from delicate chiffons to multiple layers of denim. the "Walking foot" accessory equalizes the feeding of the upper and lower layers of fabric and improves the matching of plaids , stripes and patterns. This foot helps to prevent uneven feeding of very difficult fabrics. I) The fork arm should fit into the needle screw and clamp. [. . . ]