User manual EUTECH INSTRUMENTS 2-WIRE TEMPERATURE TRANSMITTER

[. . . ] EUTECH INSTRUMENTS 3 Diagram and Dimensions (in mm) 2-Wire Temperature Transmitter Operating Instructions 4 Installation Operating with one or several Transmitters: Figure 1 - Operating with 1 Transmitter 1 Preface Thank you for purchasing the Eutech 2-wire Temperature Transmitter. [. . . ] Eutech Instruments does not accept any responsibility for damage or malfunction of the unit due to improper installation or operation of the Transmitter. Copyright ©1999 Eutech Instruments Pte Ltd. Blk 55 Ayer Rajah Crescent #04-14/24, Singapore 139 949. Tel: (65) 778 6876; Fax: (65) 773 0836; e-mail: marketing@eutechinst. com; Home page: http://www. eutechinst. com Figure 2 - Operating with several transmitters 2 Introduction 5 Electrical Connections The Transmitter is used for the continuous measurement of pH, ORP (REDOX), Conductivity, Dissolved Oxygen or Temperature, in conjunction with an appropriate sensor. Data output is via 4-20 mA current output. The Transmitter is housed in a IP65 enclosure, with openings for input and 4-20mA output. 68X256904 Rev 1 10/99 6 Before Calibration Remove cover of Transmitter and ensure that electrode is correctly connected as above. [. . . ] probe, 0 ­ 10 ppm, Industrial, integral 5m cable ORP Model Range Accuracy Calibration Input Output Operating Voltage Load Item ORP Transmitter Combination Platinum integral 5m cable ORP Electrode, w/PMP, Cat Code ECORPXTR ECHTPTTSO05B ECHTAUTTSO05B Combination Gold ORP Electrode, w/PMP, integral 5m cable Conductivity Item Conductivity Transmitter 2-Pin SS, k=1. 0, integral 3m cable Cat Code ECCONXTR ECCONSEN46 Housing 77 x 77 x 28 mm, field mountable Temperature Item Cat Code ECTEMPXTR ECPT10001M or ECPT10005M 9 Appendix 1 Temperature Transmitter Pt 100 probe, SS316 Connecting Amp Meter for Calibration Power Supply Item 120V Power Supply 220V Power Supply Cat Code EC-120-XTR EC-220-XTR Figure 3 - Method One 68X256904 Rev 1 10/99 [. . . ]