User manual FAGOR 2MF-2E X

[. . . ] The manufacturer declines all responsibility for possible inaccuracies contained in this pamphlet, due to printing or copying errors. We reserve the right to make on our own products those changes to be considered necessary or useful, without jeopardizing the essential characteristics. [. . . ] If one wishes a direct connection to the line, it's necessary to interpose an omnipolar switch with minimum opening between the contacts of 3 mm dimensioned for the plate load and in conformity with the rules in force (the ground cable yellow/green should be not interrupted by the switch). The plug on the omnipolar switch should be easily reachable with apparatus installed. - The manufacturer declines all responsibility in case the above and the usual safety rules aren't respected. All operations relative to installation (electric connection) should be carried out by skilled personnel in conformity with the rules in force. 1 - 2 - 3) Rotate the knob to the position correspondent to the needs of cooking taking into consideration that to a higher number a higher heat supply corresponds, see table "use of electric plates". "Quick and normal plates": clockwise and anticlockwise rotation with 7 fixed position (0÷ Some types of pilot lights will maintain some slight luminescence even after disconnection. : - When one makes use - nous recommandons of electric plates, we l'utilisation de advise receptacles récipients à fond plat with flat bottom d'une diamètre égal ou having same diameter légérement supérieur à or lightly higher than celui de la plaque; that of the plate; - eviter les débordements - avoid overflows of de liquide. These instructions are turned to the skilled installer as a guide to installation, regulation and maintenance in compliance with the laws and the rules in force. Any of these operations must always be carried out when the appliance has been disconnected from the electric system. Present the sealing agent along all the perimeter. 5) Before carrying out the electrical connection be sure that: - the characteristics of the system are such as to satisfy what indicated on the part number plate applied to the bottom of the work-top; - that the system is provided with the effective ground in compliance with the rules and the provisions of law in force. The ground is binding according to the law. [. . . ] ) - the electric plates have to be cleaned by means of a wet rag and lightly oiled with lubricant when they are still tepid. Rapida - normale quick - normal rapide - normale schnell-normal rápida - normal snel-normaal rápida - normal 1 automatica automatic automatique automatik automática automatisch automatica 1-2 3-4 5-6 7-8 9 - 10 11 - 12 intensità calore intensity of heat intensité chaleur hitze intensidad calor hevigheid warmte intensidade do calor TENUE - WEAK-FAIBLE SCHWACH - DÉBIL - ZWAK- FRACO DOLCE - GENTLE -DOUX MILD - MODERADO - ZACHT - SUAVE LENTO - SLOW - LENT MÄSSIG - LENTO - LANGZAAM - LENTO MEDIO - MEDIUM - MOYEN MITTEL - MEDIANO - MIDDELMATIG - MÉDIO FORTE - STRONG - FORT SRK - FUERTE - STERK- FORTE VIVO - BRIGHT - VIF SEHR STARK - VIVO - HEVIG - INTENSO Apparatus class I (type Y): it can be brought near furniture being higher than the work-top Appareil classe I (type Y): peut être mis contre les meubles dépassant en hauteur le plan de travail. [. . . ]