User manual FAGOR 6IFT-4S

[. . . ] To do this, remove the fuses or use the circuit breaker. Do not use your hob until you have replaced the glass worktop. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. [. . . ] By choosing cookware that displays this logo on its bottom or on its packaging, you can be certain that it is perfectly compatible with your hob under normal operating conditions. To help you choose, a list of cookware is provided with this guide. To check the suitability of your cookware: Place the vessel on a cooking zone at power level 4. if the display remains on , your cookware is compatible. If the display flashes, your cookware cannot be used with induction cooking. You can also use a magnet to test the cookware. If a magnet "sticks" to the bottom of the cookware, it is compatible with induction. The beep of "+" and "-" keys may be turned on or turned off when the hob isn't in use. You can then choose the desired power level. If you do not select a power level, the cooking zone will automatically turn itself off. - To turn off the beep keep simultaneously the "+" power button and the + timmer button pressed on the right or right rear cooking zone keypad until the display "bEEp" desappears on the display. - To turn on the beep keep simultaneously the "+" power button and the + timmer button pressed on the right or right rear cooking zone keypad until the display "bEEp" appears on the display. This function can be used to go to the cooking temperature you want, quickly. " (P dot) then immediately set the cooking power you want. As soon as you release the button, the display shows "P. " is obtained through pressing the "+" button again after you have set maximum power "P". After a few moments, the hob displays the cooking power; the quick increase phase has finished, you are in conventional cooking mode and you can then change the settings. " if you are not adjusting a cooking power, the hob will reset itself to maximum power "P". " pressing the power buttons will cancel the "quick temperature increase" and you will return to conventional power setting mode. Press the start/stop button for the cooking zone used or the power "-" button until 0 is displayed. Press the + or - power button to adjust the power level from 1 to P (maximum power). When it is switched on you can move directly to maximum power "P" by pressing the "-" button. [. . . ] Never place items wrapped in aluminium foil or packaged in aluminium dishes on your cooking hob. the aluminium will melt and permanently damage your cooking appliance. Objects not intended for cooking should never be placed on the hob (risk of powering on, scratches, etc. WHAT TO DO Thoroughly moisten the zone to be cleaned with hot water, then wipe off. [. . . ]