User manual FAGOR IP-200X

[. . . ] Do not allow children or the disabled to handle the appliance unsupervised. This appliance should not be used by physically, sensorially or mentally handicapped people or people without experience or knowledge of it (including children), unless they are supervised or instructed in the use of the appliance by a person responsible for their safety. Children should be watched to ensure they do not play with the appliance. For greater protection, we recommend installing a residual current device (RCD) with an operational residual current not exceeding 30 mA. [. . . ] Do not cover the air vents or air inlets or insert any foreign bodies into them. correctly centre the pans on the heating area. After using the hob, let it cool down before touching it. If you should notice any external defects, disconnect the appliance to prevent short-circuiting. Do not leave any metal objects on the hob, as they could become very hot. Pacemaker wearers should consult their doctor before using this appliance. The pan base must be made of a magnetic material. Pans made of materials such as glass, ceramic, aluminium, copper and other non-magnetic substances cannot be used. The pan base must be flat, and its diameter must be between 12 and 26 cm. After switching on the hob, a beep will sound until the pan is placed on the cooking area. If you remove the pan from the induction hob while it is functioning, the hob will stop heating and an intermittent beep will sound. After one minute has elapsed, it will switch off automatically. Ensure the air vents and air inlets are not blocked, and that there are no metal objects on the hob apart from the pans. You will hear a beep and the pilot light (4) will start to flash. ⷠAfter selecting the functioning mode, an intermittent beep will sound until you place a pan on the cooking zone. This beep will sound again each time the pan is removed from the hob, and if one minute elapses and no pan is placed on it, the appliance will switch off. If you switch on the hob but have not pressed the selector button after two minutes have elapsed, it will automatically switch off. When you start up this functioning mode, the hob will go to the pre-set power setting, which is 4. ⷠTEMPERATURE MODE ("Temp") (10): In this functioning mode, the hob automatically adjusts the power supply so that the temperature remains constant. The temperatures indicated for each setting (ºC) are for guidance purposes only, and the real temperature depends on the pan type, food, etc. You will quickly become familiar with its functioning and can use it according to personal tastes, using low temperatures to keep stews hot, high temperatures for deep-frying, etc. Whenever you start up this functioning mode, the hob will go to the pre-set temperature setting, 180ºC. [. . . ] For other causes, consult the special maintenance department. Wait for a moment and then press the ON/OFF button. The hob should function correctly when it has reached its normal temperature again. The hob should function correctly when it has reached its normal temperature again. [. . . ]