User manual FALMEC CORNER INSTALLATION

[. . . ] The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subject to change without notice for future improvement. Indd 3 2012-11-8 17:17:42 English 3 Safety precautions To prevent personal injury, injury to others or property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below: WARNING Indoor unit and outdoor unit This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. [. . . ] Do not switch ON the indoor unit when waxing the floor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not dismantle the unit for cleaning purpose to avoid injury. Do not step onto an unstable bench when cleaning the unit to avoid injury. Do not place a vase or water container on the unit. Water may enter the unit and degrade the insulation. Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. Wires live neutral earth colours (IEC Standard) brown blue green-yellow Wiring colour may vary depending on a country wiring code’s standard. € Press the button again to cancel timer operation. • The timer will also be cancelled when you press button. € The timer indicator of indoor unit will light up during timer operation. € When ON Timer is set, the unit may start earlier before the actual set time in order to achieve the desired temperature on time. € If timer is cancelled manually or due to power failure, you can restore the timer again by repeating steps above (once power is resumed). • This setting enables the desired set temperature to be reached quickly. NOTE: POWERFUL and QUIET operations can  not be activated at the same time. To achieve temperature quickly Operation conditions Use this air conditioner under the following temperature range. Temperature(°C) COOLING HEATING Maximum Minimum Maximum Minimum Indoor *DBT *WBT 32 23 16 11 30 16 Outdoor *DBT *WBT 43 26 16 11 24 18 -10 -6 DBT: Dry bulb temperature WBT: Wet bulb temperature NOTICE: • This model is not suitable for 24 hours non-stopping operation in heating mode below -10°C. When the outdoor temperature is below -10°C and you use this model out of above conditions, the outdoor unit might be frozen up and stop operation for protection control. Indd 7 2012-11-7 15:44:25 English How to use To select operation mode To set the timer 7 Cleaning instructions To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. [. . . ] Indoor fan stops occasionally during automatic • This helps to remove the surrounding odours. Operation is delayed a few minutes after • The delay is a protection to the unit’s compressor. The unit operates automatically when power • It is the Auto Restart function of the unit. Operation will is resumed after a power failure. [. . . ]