User manual FALMEC IRIDE INSTALLATION SHEET

[. . . ] Built-in 802. 11n Wi-Fi technology Connect Apple TV to your wireless network. Chapter 1   Connect. 9 What you need To start using Apple TV, you need the following: High-definition TV A high-definition TV (HDTV) that can display 720p or 1080p video Cables ÂÂ An HDMI cable to connect Apple TV to your TV ÂÂ An optical digital audio cable (optional) Network ÂÂ An 802. 11a, b, g, or n Wi-Fi wireless network (wireless video streaming requires 802. 11a, g, or n), or 10/100Base-T Ethernet network ÂÂ A broadband Internet connection (DSL, cable, or LAN) ÂÂ Your wireless network name and password (if you use one) Software and accounts To play content from a Mac or PC on Apple TV, you need: ÂÂ iTunes 10. 5 or later ÂÂ An Apple ID to rent movies or purchase TV shows from the iTunes store, and to use Home Sharing to stream content from a Mac or PC ÂÂ A Netflix account to stream content. Other accounts may be required for full access to some Internet content. 10 Chapter 1   Connect. Setting up Apple TV Apple TV connects to your TV through an HDMI port that delivers both audio and video. Before you set up Apple TV, look at the ports on the back of your TV to make sure you have the right cables: ÂÂ An HDMI cable: You can connect Apple TV to an HDTV or home theater receiver that has an HDMI port, using an HDMI cable for both video and audio. ÂÂ An optical digital audio cable (optional): Use this cable if you want to connect Apple TV to a receiver for audio. Important:  Before you connect Apple TV to a power outlet, carefully read these installation instructions and the safety information in the included Apple TV Important Product Information Guide. Chapter 1   Connect. 11 Step 1:  Connecting the cables 1 Connect one end of the HDMI cable to the back of your TV. [. . . ] To set up Home Sharing on Apple TV: 1 On Apple TV, choose Settings > Computers. 2 Choose Turn On Home Sharing, and then enter the same Apple ID and password you entered on your computer. 18 Chapter 2   Configure. 3 Watch. www. apple. com/support/appletv Read on to learn about using your Apple Remote with Apple TV. Using your Apple remote Use the Apple Remote to control Apple TV settings and navigate your content. Make sure there are no obstructions between the remote and Apple TV. Up Left Down MENU Select Right Menu Play/Pause 20 Chapter 3   Watch. Basic remote functions Here’s how to use your Apple Remote: To Move through the menu options Select an option from a menu Return to a previous menu Pause or resume current playback Return to the main menu Reset Apple TV Do this Press Up, Down, Left, or Right Press Select Press Menu Press Play/Pause (’) Hold down Menu Hold down Menu and Down, until the Apple TV status light blinks rapidly Up and Down on the Apple Remote don’t control the volume on your TV or receiver. Use the remote that came with your TV or receiver to change the volume. Pairing Apple TV with a remote The Apple Remote works with the built-in IR receiver on Apple TV. To set Apple TV to work with only the included remote, pair Apple TV and the remote. To pair Apple TV with the included remote: 1 Keep the remote pointed directly at Apple TV. 2 Hold down Menu and Right for 6 seconds. Chapter 3   Watch. 21 Or, you can: 1 Choose Settings from the Apple TV main menu. 2 Choose General > Remotes > Pair Apple Remote. When you successfully pair your Apple Remote, Apple TV displays a chainlink symbol ( ) above a picture of a remote. Apple TV now works with only the paired remote. Unpairing Apple TV from a remote If you lose the Apple Remote that you paired Apple TV with, you can use another Apple Remote to unpair Apple TV from the lost remote. To unpair Apple TV from a paired remote: 1 Keep the remote pointed directly at Apple TV. No Problem. 27 ÂÂ Make sure you’re using the correct audio cable and that it’s connected firmly to Apple TV and to your TV or receiver. ÂÂ If you’re using the HDMI port for audio, make sure your TV supports audio through its HDMI port. The HDMI ports on some older TVs support only video. ÂÂ If Apple TV displays a picture of a remote and a warning symbol (·), you need to replace the battery in the remote. See “Changing the remote battery” on page 23. Chapter 4   Problem?29 If Apple TV can’t access the network ÂÂ Check for any obstructions, and adjust the location of the base station or Apple TV. ÂÂ If your network has security enabled, make sure you enter the correct password. ÂÂ If security is enabled on the network, temporarily disable it on the base station and try connecting again. ÂÂ Check the IP address Apple TV is using. If it starts with 169. x. x. x, the router or base station may not be configured properly. Check to see if DHCP access is available, or configure Apple TV with a manual IP address. ÂÂ Apple TV cannot connect to a wireless network that contains high (extended) ASCII or double-byte (Unicode) characters (such as Japanese, Korean, or Chinese) in the name or password. If your TV screen appears fuzzy or black ÂÂ Make sure your HDTV supports 720p or 1080p video. ÂÂ Make sure you’re using the correct HDMI cable and that it’s firmly connected to Apple TV and to your TV. ÂÂ Make sure the input setting on your TV matches the input port the HDMI cable is connected to. For information, see the documentation that came with your TV. 30 Chapter 4   Problem? [. . . ] Apple is not responsible for printing or clerical errors. Apple 1 Infinite Loop Cupertino, CA 95014 408-996-1010 www. apple. com The Apple logo is a trademark of Apple Inc. , registered in the U. S. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws. Apple, the Apple logo, AirPlay, Apple TV, iPad, iPhone, iPhoto, iPod touch, iTunes, Mac, and Mac OS are trademarks of Apple Inc. , registered in the U. S. [. . . ]