Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FALMEC REMOTE UNIT. We hope that this FALMEC REMOTE UNIT user guide will be useful to you.
Lastmanuals help download the user guide FALMEC REMOTE UNIT.
Detailed instructions for use are in the User's Guide.
[. . . ] Do no use pipes with smaller diameter, avoid using angled pipes, make sure that the pipes are at least of the minimum length. Comply with the current regulations on air discharge into the atmosphere. [. . . ] The diameter of the holes must be suitable for the diameter of the screw anchors (see fig. 3) Align the holes of the brackets with the holes of the screw anchors and screw the screws in. 4) Make sure that the anchoring points are adequately resistant for the load of the equipment. 5) Install (using 4 screws supplied) the pipe fitting provided (see fig. 4) above the hood motor in order to connect the fume outlet pipe of the hood to the external extraction unit. - Do not use pipes with diameter smaller than 150mm, avoid using angled pipes, make sure that the pipes are at least of the minimum length. - Make sure that the direction of the air inlet and outlet is as indicated on the arrow on the equipment label. The equipment must be used exclusively with the 4-speed electronic control panel installed on the hood. 6) Connect the 6-pole connector C1 of the equipment to connector C2 of the electronic control panel of the hood. First make sure that the conveyor that is normally installed on the hood has been removed and disconnected from the power supply line and from the 4-speed electronic control panel. 7) Connect the appliance to the power supply in compliance with the relevant regulations. Only specialised technicians are authorised to carry out installation works. [. . . ] The equipment must be used exclusively with the 4-speed electronic control panel installed on the hood. 10) Connect the 6-pole connector C1 of the equipment to connector C2 of the electronic control panel of the hood. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FALMEC REMOTE UNIT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FALMEC REMOTE UNIT will begin.
