User manual FARSTONE TOTAL BACKUP RECOVERY SERVER

[. . . ] Total Backup Recovery Server User's Guide Copyright Notice No part of this publication may be copied, transmitted, stored in a retrieval system or translated into any language in any form or by any means without the expressed written permission of FarStone Technology, Inc. FarStone grants you the right to use one copy of the enclosed software program ("SOFTWARE") on a single computer. If the SOFTWARE is installed on a network, or more than one user can run the SOFTWARE at the same time, you must purchase an additional license for each additional user or computer. Trademark FarStone® is a trademark of FarStone Technology, Inc. Microsoft, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. [. . . ] Select a destination partition or a destination hard drive to be restored from the image file, and click Next. To restore a single partition, skip to step 10. To restore the entire hard disk, please select a restore option. Select the checkbox if you would like to modify the destination partition size. Do not check the box if you have multiple systems or a hidden partition. If you selected option a, double click the partition capacity to be resized from the list. If you selected option b, skip to step 10. When it displays the structure of the destination partition, double-click the highlight and modify its size, and click Next to continue. Tip The restoration process will require your computer to reboot into the FarStone Recovery Environment. 11. Click Next to start the restoration after confirming the source and the destination. Click OK to enter the FarStone recovery environment to complete the restoration process automatically. Your computer will restart to complete the restoration. After that, it will reboot into Windows automatically. You will need to reallocate space for the secure area if you installed System Snapshot and want to continue to use the system snapshot feature: 1. Click Yes to restart your computer and complete the process. 4. 3. 4 Perform Universal Restore You can restore the system partition or the entire hard drive of the selected client to dissimilar 30 hardware. Select Restore, and click Restore Your Computer. Select a backup image from the list, or click here to select an image file stored on a network share. Select a Complete Backup point or any Incremental Backup point to restore from, and click Next. Select to restore with Universal Restore, and click Next. When the dialog box appears, click OK to restart your system into FarStone Recovery Environment to begin the restoration process, or Cancel to exit. After your computer restarts to complete the Universal Restore, you need to do the following: 1. Select to restore a single partition or the entire hard drive, and click Next. [. . . ] A: If there are too many dispersed/fragmented files in your system partitions, Total Backup Recovery Server will defragment them to free up continuous space for the application's kernel file Secure Area. Moreover, when you install System Snapshots on a FAT32 partition, Total Backup Recovery Server will divide the Secure Area, which takes much longer time than an installation on NTFS partitions. How can a PC be restored following a data disaster?A: There are three ways to boot the PC: 1. [. . . ]