User manual FAYTECH FT 1500

[. . . ] tHIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES , EXPRESSED OR IMPLIED , INCLUDING WITHOUT LIMITATION THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. All claims under warranty must be made promptly after occurrence of circumstances giving rise thereto and must be received within the applicable warranty period by faytech or its authorized representative. Such claims should include the Product type and serial numbers and a full description of the circumstances giving rise to the claim. Before any Products are returned for repair and/or adjustment, written authorization from faytech or its authorized representative for the return and instructions as to how and where these Products should be shipped must be obtained. [. . . ] Use the Explorer on the CD and select the appropriate subdirectory (Touch Driver, then the right operation system) to open the installation file setup. Now you will see the following window: Select the Windows driver 2000/XP/Vista/Windows7 in the upper right. if a security warning pops up , click "Run" , "Continue" or "Execute". Under Vista you must confirm the UserAccount Control with "Continue". Some further warnings may be given depending on installed security programs. always click the button to continue the operation. To complete the installation with all default options, click "Next" on each of the following dialog boxes. To switch back to a previous step, click the "<back" button. Later on you can choose the language for the OSD. It's advisable to close all other programs before beginning this installation. Check the box (see the picture on the next page upper left) only if you want to install the PS/2-Driver. >> Larger enables you to make a successful double- click within a larger area. To the right of the mouse icon are options to set different mouse-like modes. normal mode offers the most intuitive touch-operation. Normal-Mode: Allows the user to select an object or drag an object with the touch pen or a finger. This is the best mode to use for most applications. Click on release: Contrary to the click function in touch, it is generated a click when the display is released. Click on touch without moving cursor: The first touch point generates a click. the cursor follows the finger / pen movement. For a better understanding of this setting, try it with the Draw Test application under the Tools tab. Click on release without moving cursor: The cursor does not move to the touch position except at the lift-off point. For a better understanding of this setting, try it with the Draw Test application under the Tools tab. [. . . ] Also you can configure the profiles using a software tool such as powerstrip. Power supply error: If the display has no signal input, there might be an error with the power supply. First please check the connection with another power supply before you return the display. We're happy to exchange the defective power supply if necessary. [. . . ]