User manual FBII START XL-4800 EZ

[. . . ] The following pages will familiarize you with the procedures for operating the Security System. The system can be operated from different styles of keypads: model XK-716 and XK-516 LED keypads containing indicator lights or model XK-7LC and XK-5LC LCD keypads containing a two-line readout. Please determine the type of keypads present within your system. This manual covers the START START XL-4800 EZ800 EZ, START START XL-4800 EZ800 EZB, START START XL-4800 EZ800 EZC and XL-5 systems. [. . . ] The Bat, Stay, Rdy, Com, and Ins LEDs perform their normal function. ­ 35 ­ Quick Commands (cont'd) Disarm All Partitions (9) To disarm all partitions from a single keypad enter 9 into the partition selection display. This command will disarm all partitions where that user is authorized that are currently armed. NOTE: The keypad will return to the original partition after approximately 20 seconds. Quick Arming [# 1] Depression of the # key followed by the digit 1 will ARM the system without the need for entry of a user code. This is known as QUICK ARMING and will arm the system in the AWAY mode. This is identical to the ARMING command previously described. NOTE: You will still be required to enter a user code to disarm the system. Quick Forced Arming [# 2] You may also FORCE ARM the system, which will arm the system and bypass any burglary zones which are not ready, without entry of a user code. Simply press the # key followed by the digit 2. Time Set [# 3] The Security System contains a built in system time clock. The clock can be set as follows: 1) Press # 3 Enter # 3 If partition auto arming is enabled, the system will display the following message. If auto arming is not enabled, advance to step 2). (1) clock (2) arm To set the system clock, enter 1 on the keypad. 2) The system will display the current time as follows: ­ 36 ­ Quick Commands (cont'd) SET TIME/DATE Command 5 from the Exception Menu CURRENT DAY OF WEEK SU= Sunday M=Monday T=Tuesday W=Wednesday TH=Thursday F=Friday SA=Saturday CURRENT ENTRY FIELD HR=Hour MIN=Minute MON=Month DAY=Day YR=Year W HR CLOCK SET 10:25p 03/04/92 CURRENT TIME (Hour:Minute) AM/PM CURRENT DATE Month/Day/Year The top line shows the current time and the field being defined. The INSTANT key will be used to move between the fields and the CODE key is used to change between AM/PM. Each user code can be valid in more than one partition. For example, an apartment manager may have access to all of the apartments. The partition assignment function allows authorized users (level 1 & 2) to change the partition access of the various user codes. Note: A level 1 user will be able to change the partition assignment for users within all partitions, while a level 2 user can only change partition assignments within the partitions that they are permitted access. To enter the partition access section enter # 7 and your user code. Note: The user must have an authorization level of 1 or 2 in order to access this function. START START XL-4800 EZ800 EZ ENTER US# to MAP 001-064, G to exit XL-5 ENTER US# to MAP 001-128, G to exit Enter the user number (001 - 064; START START XL-4800 EZ800 EZ or 001-128; XL-5) to be mapped to various partitions. Set 1-8 G = ex xxx PART 12345678 This display allows assignment or removal of users from each of the 8 partitions. The first line displays the user being modified (displayed as xxx). The second line shows the partitions where the user is currently ­ 40 ­ Quick Commands (cont'd) active. For example, if the keypad shows 1 345 then the user is active in partitions 1 3 4 and 5. To add (or remove) partitions from the user profile simply enter the partition number. [. . . ] Telephone lines are also subject to compromise by sophisticated intruders. · Even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect themselves from the emergency situation. In the case of a monitored alarm system, authorities may not respond appropriately. · This equipment, like other electrical devices, is subject to component failure. [. . . ]