User manual FBII XL4600DL

[. . . ] 6) DISPLAY AREA- This section of the LCD keypad displays the current system status in this two line by sixteen character display. The second line of this display can be programmed by your installer to contain customized descriptors for the areas of protection within your location. Throughout this users manual the following conventions are used to display the keystrokes required to perform the functions. CODE Key labeled CODE on keypad Four digit user code. [. . . ] In order to enter the STAY mode, the system must be READY. STAY PROCEDURE: STAY [USEQ Depress the STAY key followed by your user code. After a successful STAY arming the ARMED indicator will be lit. In addition, on LED keypads the STAY indicator will be lit. In LCD keypads the following display will appear; pi51 In the STAY mode only themeter burglary protection is active. You are free to walk around the residence without activating any of the interior protection zones. >> Remember, you must DISARM the system to when you want to leave the premise. Note: The STAY option will automatically be reset after the system is disarmed. 5. INSTANT The INSTANT mode arms the system and eliminates the entry time delay interval. This mode could be used if anyone enters through an entry/exit zone the alarm system will instantly activate. The system must be ready to select the INSTANT option. INSTANT PROCEDURE: INSTANT [USER] "i Depress the INSTANT key followed by your user code. Upon successful INSTANT ARMING of the system the ARMED Indicator will be lit. In addition, on LED keypads the Instant indicator will be ON. LCD keypads will contain the following message; rT Note: The INSTANT option will automatically be reset after the system Is disarmed. 6. INSTANT - STAY The INSTANT STAY mode will arm the system with the characteristics of both the INSTANT and STAY modes. The system will be armed with the interior portions bypassed and the entry delay will be suspended. The system must be READY in order to enter this mode. PROCEDURE: INSTANT-STAY [USER] STAY kSTANT [USER] Depress the INSTANT and STAY keys in any order followed by your user code. After a successful INSTANT STAY arming the ARMED indicator will be, lit. In addition, on LED keypads both the INSTANT and STAY lights will be on. LCD keypads will contain the following message; ymsy 7. BYPASS . 1 !T Bypasses are performed to eliminate burglary zones that are not ready or fab. , ' . BYPASS PROCEDURE: BYPASS [USER] ZN Depress the BYPASS key followed by your user code and zone number (4-6) to be bypassed. BY PASS [USER] 2 If the zone has already been bypassed, the sequence will unbypass the zone except if the system is armed and the unbypassed zone is still not ready. Unbypass means that the zone returns as an active burglary zone. [. . . ] Establish a household emergency evacuation plan in the event of fire. 1 - Evaluate possible escape routes from your home. 2- Select 2 escape routes from each room. 3- Rooms on the second floor should have a rope ladder. [. . . ]