User manual FELLOWES BLUESPORT

[. . . ] 5-6 (On/Off, volume control, making calls, voice dialing, answering calls, muting calls) Troubleshooting . 7 2 BlueSport_1Manual 6 language. qx 12/12/03 11. 28 AM Page 3 Overview This User`s Guide focuses on how to use the Earglove BlueSportTM with your Bluetooth® compatible mobile phone. You can connect your Earglove BlueSportTM earpiece to your mobile phone to keep your hands free for other tasks at the office or in the car. The Earglove BlueSportTM can also be used with Bluetooth® compatible PDAs, PCs and other consumer electronic devices that support the Bluetooth® Headset Profile version 1. 1. Getting Started Before you use the Earglove BlueSportTM earpiece for the first time: · Charge the earpiece (see page 3) · Decide if right or left ear will wear the earpiece (see page 4) · Pair the earpiece with a Bluetooth® mobile phone (see page 5) Store and charge earpiece in a safe place when not in use. What is Bluetooth Wireless Technology? ® Bluetooth® wireless technology makes it possible to connect consumer electronic devices using a radio link instead of cables to transmit voice and data information. [. . . ] For Hands Free mode pairing instructions, see below. Activate the Bluetooth® function on your phone or other device. Please refer to the owner`s manual of your phone for instructions on activating the Bluetooth® pairing function. To pair the earpiece, press the pairing button once until the LED indicator light on the earpiece flashes an alternating green and amber. Make sure the earpiece and phone are close to each other. Follow the Bluetooth® pairing/set-up instructions and screen prompts on your phone to pair it with the earpiece. Please refer to your phone`s owners manual or go to www. fellowes. com/bluetooth for specific pairing instructions. When prompted, enter the earpiece password: 0000. Please refer to the owner`s manual of your phone for instructions. If pairing is successful, the LED indicator light will show solid green for 4 seconds and then switch off. To pair in Hands Free mode: Follow steps 1 and 2, and then press the pairing button again. The LED indicator light will flash alternately amber and green at a faster cycle. PLEASE NOTE: Most Bluetooth® phones will pair with the earpiece in Headset mode, but some will also pair in Hands Free mode which provides additional functionality (see your phone`s owners manual for more information). Pairing in Hands Free mode automatically pairs the headset in Headset mode as well. If pairing does not work, wait 90 seconds, reset your phone or device to the beginning of the Bluetooth® pairing process, and repeat steps 1-5. Once pairing is complete, your earpiece will work with your cell phone any time both units are powered on and in close proximity to each other. Resetting the Earpiece When pairing the earpiece to a new Bluetooth® device, the earpiece resets itself to its default settings. This clears all current pairings and returns all functions (e. g. volume) to the original setting. SECTION 4: General Operation To turn the earpiece on: Flip the on/off switch to the on (l) position. The LED indicator light will flash green twice and then stay off. You will hear short low, medium and high tones in quick succession. To turn the earpiece off: Flip the on/off switch to the off (0) position. [. . . ] To end a call, press the answer/end button a second time. Transferring Sound from the Phone to the Earpiece If you initiate a call from your phone without using the earpiece, you can transfer the call to the earpiece if the earpiece is on, paired with the phone, and within range. To transfer sound to earpiece: While call is in progress, press the answer/end button on your earpiece to transfer the call sound to the earpiece. Voice Dialing If your phone includes a voice-dialing mode, you can place calls with voice commands: 1. Make sure the phone and the earpiece are on and within range of each other. After the beep, voice dial as you normally would. [. . . ]