User manual FELLOWES FS 3FS 3+FS 5FS 5+S5 MANUAL-2000

[. . . ] · Shredder should never be placed near or over a radiator, heat register or water. · Operate shredder from the power source indicated on the serial label or power supply. If you are not sure of the type of power available, consult your dealer or a power company. · Do not rest anything on the power cord. [. . . ] · This compact shredder is intended for paper only. Do not attempt to shred paper clips and other hard materials as damage to the cutting system may result. · Keep out of the reach of children and pets. · Never insert your hand or fingers into feed opening. · This shredder should be operated only with an operator in attendance. Installation · Position shredder over basket and extend adjustable arm (Figure A) so shredder solidly rests on basket edges (Figure B). · With shredder positioned on basket, plug into outlet. Do not alter the plug. Operation Prepare paper to be shredded. Remove staples and paper clips and make sure to feed no more than the recommended sheet capacity at one time. Figure A ® · Slide the main switch to the (I) position to activate the standby mode. Figure B · The shredder automatically STARTS when paper is placed in entry and STOPS when finished shredding. Overload Protection This shredder is protected by a built-in thermal overload device that serves to protect the motor from overuse. When continuous shredding is conducted for an extended period of time, the shredder will automatically turn itself off to cool down. When shredding is automatically stopped, allow the unit to stand for about 30 minutes before using it again. Important Note This paper shredder is not intended to shred high volumes of paper. Please refer to the Specifications for the recommended daily usage and sheet capacity of this shredder. Please note that if the paper is wider than the entry, and you fold it to fit, the paper thickness increases and the recommended capacity may be exceeded. If a Jam Occurs 1. Immediately return power switch to OFF (O) position. Depress power switch to the REVERSE (R) position until the jammed paper has been fully removed from the cutter. If the machine jams in reverse, unplug the unit and cut all excess paper off the top and bottom of the machine before repeating the jam-clearing procedure. See Specifications. 2 Specifications Without Basket Sheet Capacity 20# (74gsm)/DIN A4, 70 g/m2 Entry Width Shred Size Shredding Speed Recommended Daily Usage Power Source Dimensions (HxWxD) With Basket FS3+ 3 FS5+ 5 S5 5 FS3 3 FS5 5 9"/230mm 1/4"/7mm 14 fpm/4. 2 mpm 30 sheets 120V/60Hz (North America) 230-240V/50Hz (Europe) 5-3/4" x 13-11/16" x 3-3/8" 14-1/4" x 13" x 8-1/4" 146 x 348 x 86 mm 362 x 330 x 210 mm Overload Protection This shredder is protected by a built-in thermal overload device that serves to protect the motor from overuse. When continuous shredding is conducted for an extended period of time, the shredder will automatically turn itself off to cool down. [. . . ] You may have other legal rights that vary from state to state. For more detail or to obtain service under this warranty, please contact Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time). For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact the appropriate location listed in the Contact for Service section of this instruction manual. Warrantor: Fellowes Manufacturing Company. _____________________ Anthony Storrie 3 Contact For Service Vos Contacts Fellowes Sus Contactos Fellowes Ihr Fellowes Kontakt Uw Fellowes Contacten Vostri Contatti Fellowes United States Australia Canada United Kingdom Japan Benelux Italy Germany France 1-800-955-0959 (In Melbourne) (03) 9330-3211 (Outside Melbourne) 1-800-331-177 1-800-665-4339 01302-885 331 +81-3-5496-2401 +31-(0)347-377988 +39-071730041 +49-5131-49770 +33-(0)4-72-08-25-45 ® 1789 Norwood Avenue · Itasca, Illinois 60143-1095 630-893-1600 · Customer Service 1-800-955-0959 http://www. fellowes. com France Rennes, I-V Germany Garbsen, Han. [. . . ]