User manual FELLOWES OPTI GEL CORDLESS

[. . . ] Un-install or remove the current mouse driver. Before installing the Fellowes Easy Point driver, we suggest you check if any other mouse driver is installed in your system. If yes, to avoid conflict with the Fellowes driver, please un-install or remove that driver before installation of the Fellowes Easy Point software. Remember to save your Fellowes Easy Point CD in case you ever need to reinstall the software. [. . . ] To access the Easy Point software, double click the mouse icon on the Windows Taskbar. Mouse icon as it appears in the Windows Taskbar The Easy Point software can also be accessed by clicking the Start button, point to Programs, then Fellowes followed by Easy Point software. 7 TROUBLESHOOTING The Fellowes Opti Gel Cordless does not work after installation or is not detected: · Check all connections to be sure they are secured to the correct ports, and then restart the computer. · If using as a PS/2 mouse: make sure the PS/2 mouse port has the proper configuration. Refer to your computer documentations for the correct port configuration. You may also have other system devices that conflict with the mouse. Check the IRQ/address settings of these devices for conflicts, and change the settings as required. · If using as a PS/2 mouse: make sure that the BIOS setting on the connect port of your computer shows Enable. Refer to your computer document for the correct port configuration. The screen cursor does not track well or the cursor does not move: · The optical sensor on the mouse will not function on a highly reflective surface such as glass, a mirror or some black surfaces. Hence the surface of your desktop may be interfering with the performance of the input device, utilize a traditional mouse pad or use the mouse on a different surface. · Orientation of the receiver: Make sure the receiver is placed as close to the mouse as possible. Objects such as computer monitors, metal cabinets, other 27 Mhz devices can interfere with this product. If you can see the LED on the receiver, you should be able to see it blink when the mouse is moved or a button is pressed. This feature should help to determine the correct location for your environment. · Check to make sure you are using fresh batteries. · Change the channel ID the device is using by following the instructions contained in this manual. The cursor moves uncontrollably around the screen, files may open and other unexplained occurances: · There is a conflict with drivers and/or devices. Please remove all other drivers or devices until the problem is resolved. · Use the other port type (USB or PS/2) to resolve the conflict. 8 FELLOWES CUSTOMER SERVICE Our technical support representatives are readily available to help you with your problems. We will do our best to resolve the issue, or we will offer you full support in your decision to obtain a refund (please keep a copy of your dated sales receipt as proof of purchase). For technical support call 1-888-FEL-TECH or email at: www. feltech@fellowes. com. For questions about the warranty or functionality of this product, call 1-800-945-4545. 9 SOFTWARE LICENSE AGREEMENT The enclosed software is being licensed to the original purchaser only on the condition that all of the terms contained in this license agreement are accepted. This is a legal agreement between the original purchaser and Fellowes. By opening the product package the purchaser agrees to be bound by the terms and conditions of the agreement. [. . . ] Special Precautions The precautions below are to prevent the sudden release of electrolytes, which these prohibited actions can cause: · Do not open, puncture, or mutilate the batteries. · Do not use fire to dispose of batteries. Released battery electrolyte is corrosive, can cause damage to the eyes and skin, and may be toxic if swallowed. 12 DISCLAIMER The following does not apply to any country where such provisions are inconsistent with the local law: Fellowes Inc. makes no warranties with respect to this documentation, whether expressed or implied. All material is provided "as is". [. . . ]