User manual FELLOWES POWERHOUSE 1000-2001

[. . . ] Wrap the other side's "U" unplug the power cord. down so the front edge of the guide extends one7. This product should never be placed near or over a half in front of the machine, with the rest of the radiator or heat source. [. . . ] D) If the product does not operate normally when the operating instructions are followed. E) If the product has been dropped or the casing has been damaged. This shredder should be operated only with an operator in attendance. Do not insert aerosal cleaners into or around the shredder. Some agents may combust, causing serious injury. Bag Support Rod Wire Form Feed Guide Front Feet Back Feet Bag Caution Never insert hand, fingers or any foreign objects into the feed opening. Keep all loose articles of clothing, ties, jewelry, long hair or other loose objects away from feed opening. Always turn off and unplug the machine before moving, servicing, cleaning or conducting any activity other than normal operation. Serious injury may result. Switching shredder to REVERSE. Press rocker switch to position (R) and hold. The cutting system is now running in the reverse direction. Release the switch and it will automatically reset to (0) 0FF. If a Jam Occurs The cutting system may jam if the recommended capacity is exceeded (see specifications). When this occurs, depress the switch to the REVERSE position (R). The operator should tear out and remove excess jammed paper, if necessary, and then commence shredding in smaller quantities so as not to further jam the machine. Maintenance · No adjustments or maintenance inside of machine is required. · Periodically, unplug shredder to clean dust and debris that may accumulate. · For repairs, call Fellowes Customer Service at 1-800955-0959. Operation Read operating instructions before putting shredder into operation. Insert plug into power outlet. Technical Specifications Cutting Style Strip 1/4" (5. 99mm) 16-18 24 FPM 15" (381mm) 1/4 hp Shred Size Sheet Capacity 8-1/2 x 11" 20 lb. Speed 115V, 60Hz Entry Width Motor Power 120V Prepare paper to be shredded, making sure not to exceed the recommended sheet capacity. [. . . ] When the shredder's recommended sheet capacity (per specifications on page 5-6) has been exceeded (resulting in a paper jam). When the original Model and Serial Number Plate has been altered, effaced or removed. When repair or service covered under this warranty (other than routine maintenance as described in the Owner's Manual) has been performed by personnel without the express written consent of Fellowes. [. . . ]