User manual FELLOWES PS70-2PS70-2CDPS80C-2 MANUAL-2001

[. . . ] · Keep loose objects (jewelry, ties, long hair) away from shredder. These items and others like them may cause serious injury if they accidentally fall into the paper entry. PARTS OF THE SHREDDER C D E B F G A CAUTION · Confetti cut shredders contain sharp edges on the underside of the machine. Use caution when positioning the shredder head onto the basket. · Do not exceed recommended sheet capacity. [. . . ] Extensive use of paper clips or other hard materials will result in damage to the cutting system and will void the manufacturer's warranty. Be sure power switch is in the OFF (O) position. Plug shredder into the proper power supply outlet. To clear the cutting blades, the shredder will "run" for about 1 second immediately after switching to AUTO (I). When the unit is turned on and in standby mode (green LED lights), the shredder is ready to be fed paper through the paper entry. (See "TROUBLESHOOTING" if red LED is lit. ) WARNING NEVER insert hands or fingers into paper entry as serious personal injury may result. Do not exceed recommended sheet capacity (see CAUTION "Product Usage Guide" on page 1). Slide paper straight into paper entry until the shredder automatically begins shredding. The shredder automatically stops when shredding is complete. Continue shredding as desired to a MAXIMUM shredding time of 15-20 minutes. At this time, the machine MUST be allowed to "cool down" for a MINIMUM of 25 minutes. (See "CoolDown Cycle" section for more information. ) If the shredder jams or shuts off before the maximum shredding time, see "Clearing a Jam" section for further instructions. Move power switch to OFF (O) position when shredding is complete. Unplug power cord from outlet when shredder is unattended not in use. Look through viewer to see if basket is full. If full, pull out basket and empty basket contents. Replace basket into cabinet. Cool-Down Cycle This shredder is protected with a special safety feature which prevents the motor from overheating with extensive use. When shredding is attempted beyond the machine's maximum running time, the shredder will automatically shut off its motor until it has cooled to an acceptable operating level. This is normal and the shredder will return to operation after the "cool-down" period. See "Product Usage Guide" (page 1) for maximum running time and related cooling or "off" time. Clearing a Jam If the shredder sheet capacity is exceeded or paper is not put in straight, a jam may result. See "Product Usage Guide" (page 1) for maximum sheet capacity for your shredder. In the case of a jam, the shredder's red LED will light and the shredder will automatically stop until the jam is cleared. [. . . ] Shredder has exceeded the maximum run time and requires a "cool-down" time. See "Product Usage Guide" (page 1). See "OPERATION - Clearing a Jam. " Cutting blades need to be oiled REGULARLY. Shredder head is not assembled properly (Model PS80C-2 only). [. . . ]